Impreza Group-N project.

[Aram]

Small update:

The loom isn't finished yet, but I had some progress this week.

First up was the fusebox, I had the old fixation points from the previous car but one of the round relais on the side was in the way of the cage.
When removing the ABS wiring from the loom one of those relais was gone so now it did fit.

Here it sits after retaping the wires again:



Meanwhile the tank and some other stuff was removed from the old car, it's getting very empty now:





Then the engine loom had to find it's way into the cabin, but there was a cage in it's way now.
So I had to open up one of the holes:

As it was:



After some cutting:



And viola, enter ye, enter ye....:



I found some airbag cables in the loom while removing ABS so of course it was exit --->:



First steps in the retaping of the loom, some small wires:



3 major connectors needed a fixed place somewhere, in the other car they were hanging loose, I didn't like that so it had to be fixed in this car.
This is the best place for them but nothing to fix them to:



So we made a rather large bracket for them, after a afternoon of measuring grinding and welding this came out:



And this is how it is in the car:





I'm pretty happy with the resluts actually.

The loom is nearing completion now, and not a minute to soon, I'm getting fed up with it.