Bushings!:)

Threaded Mode | Linear Mode

Bushings!:)

01-05-2005, 05:07 PM

Post: #6

Widar

Posting Freak

Posts: 1,768
Joined: Sep 2004
Reputation: 0

I got my rear axle already of the car and most are unmonted from the car. I think i'm gonna remove all the old bushings then sandblast all the parts.
Maybe a little bit of paint as well.

I'll try to remeber to take pictures, i'm real bad at that. :/

mux213 Wrote:The bushing that hold the bar to the axle require a little bit of cutting. If you look at the bushings you will see a small line at one end. Cut there and in doing so cut open one side of the bushing. Dont worry, this won't weaken it. Don't cut both sides though!

Strange... I didn't have to cut mine, they came opened..?

« Next Oldest | Next Newest »

Messages In This Thread

Bushings!:) - Mux213 - 01-05-2005, 04:33 PM

[] - Mux213 - 01-05-2005, 04:44 PM

[] - Mux213 - 01-05-2005, 04:54 PM

[] - Widar - 01-05-2005, 04:59 PM

[] - Mux213 - 01-05-2005, 05:03 PM

[] - Widar - 01-05-2005 05:07 PM

[] - Mux213 - 01-05-2005, 05:07 PM

[] - ZaX - 01-05-2005, 07:11 PM

[] - Ivan141 - 01-05-2005, 09:24 PM

[] - Ivan141 - 01-05-2005, 09:32 PM

[] - Ivan141 - 01-05-2005, 09:47 PM

[] - Widar - 01-05-2005, 09:49 PM

[] - Ivan141 - 01-05-2005, 10:22 PM

[] - Ivan141 - 01-05-2005, 10:36 PM

[] - Mux213 - 01-05-2005, 11:26 PM

[] - NoHachi - 01-06-2005, 12:12 AM

[] - robokill - 01-21-2005, 05:12 PM

[] - KristianAE86 - 02-02-2005, 12:57 AM

today mounted.. - AndrE86 - 04-04-2005, 08:53 PM

[] - Tofu @ AE86 - 04-18-2005, 01:23 AM

some photos... - Tofu @ AE86 - 04-19-2005, 09:08 PM

Re: some photos... - KristianAE86 - 04-19-2005, 11:32 PM

[] - Tofu @ AE86 - 04-20-2005, 12:29 AM

[] - apardal - 04-20-2005, 11:41 PM

[] - ZaX - 04-21-2005, 09:53 AM

[] - KristianAE86 - 04-21-2005, 10:34 AM

[] - Tofu @ AE86 - 04-21-2005, 03:57 PM

[] - ZaX - 04-21-2005, 04:34 PM

[] - KristianAE86 - 06-06-2005, 02:21 PM

[] - Widar - 06-06-2005, 02:26 PM

[] - gt99 - 06-06-2005, 02:45 PM

[] - KristianAE86 - 06-06-2005, 09:50 PM

[] - Tofu @ AE86 - 06-06-2005, 10:34 PM

[] - Widar - 06-07-2005, 12:22 AM

[] - Dorito86 - 06-07-2005, 10:45 AM

[] - Widar - 06-07-2005, 10:55 AM

[] - KristianAE86 - 06-07-2005, 05:44 PM

[] - Widar - 06-07-2005, 09:09 PM

[] - KristianAE86 - 06-08-2005, 12:05 AM

[] - Widar - 06-08-2005, 12:47 AM

[] - Mux213 - 05-15-2007, 02:45 PM

[] - Bubble_Drift - 05-15-2007, 02:59 PM

[] - Mux213 - 05-15-2007, 03:17 PM

[] - Bubble_Drift - 05-15-2007, 03:25 PM

[] - Mux213 - 05-15-2007, 03:41 PM

[] - kungfumaster - 05-15-2007, 04:27 PM

[] - Mux213 - 05-15-2007, 04:42 PM

[] - DJexor - 05-15-2007, 06:27 PM

[] - DJexor - 05-15-2007, 06:30 PM

[] - DJexor - 05-15-2007, 06:34 PM

[] - Ivan141 - 05-15-2007, 06:37 PM

[] - DJexor - 05-15-2007, 07:29 PM

[] - kungfumaster - 05-15-2007, 08:18 PM

[] - Lipinhu - 05-15-2007, 09:04 PM

[] - Mux213 - 05-15-2007, 09:09 PM

[] - Ivan141 - 05-15-2007, 10:36 PM

[] - banpei - 05-16-2007, 02:08 PM

[] - Mux213 - 05-16-2007, 02:12 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Poly vs OEM bushings	Jezza_hr	5	7,527	05-14-2014 11:28 PM Last Post: Jezza_hr
	Steering Rack bushings	filh	4	5,923	03-12-2010 10:45 PM Last Post: filh
	Drivers review Prothane Bushings	Michel	11	16,867	04-13-2008 05:57 PM Last Post: Mux213
	Witch one to buy?(Bushings)	zounds	3	4,879	11-23-2006 12:03 AM Last Post: delange
	Bushings question.	CircuitFreak	18	16,705	06-20-2006 03:02 PM Last Post: Ivan141

User(s) browsing this thread: 11 Guest(s)