Bushings!:)

Threaded Mode | Linear Mode

Bushings!:)

01-05-2005, 09:32 PM

Post: #10

Ivan141 Offline

Super Moderator

Posts: 6,358
Joined: Sep 2004
Reputation: 0

After mounting the new springs we started work on the front stabiliser bushings.
We started with new end links, as these are pretty easy to replace, especially when you have a mate helping you out. Just put a 10 or 12 wrench on the flat bit in the center of the end link and start undoing those nuts on the top and bottom. Once you're done with that it is easier to undo them on the other side as well so you can move the stabiliser bar up without trouble.
The new end links come complete from prothane, you just put them on in the correct order and start fastening the nut onto the bolt. Be very carefull not too get carried away with tightening the nuts on these ones, cause you'll just squash the poly bushes if you go to far.
here's a pic of halfway the assembly, and the finished product.

Attached File(s) Thumbnail(s)

FABRICA MI DIEM, PVNC!

« Next Oldest | Next Newest »

Messages In This Thread

Bushings!:) - Mux213 - 01-05-2005, 04:33 PM

[] - Mux213 - 01-05-2005, 04:44 PM

[] - Mux213 - 01-05-2005, 04:54 PM

[] - Widar - 01-05-2005, 04:59 PM

[] - Mux213 - 01-05-2005, 05:03 PM

[] - Widar - 01-05-2005, 05:07 PM

[] - Mux213 - 01-05-2005, 05:07 PM

[] - ZaX - 01-05-2005, 07:11 PM

[] - Ivan141 - 01-05-2005, 09:24 PM

[] - Ivan141 - 01-05-2005 09:32 PM

[] - Ivan141 - 01-05-2005, 09:47 PM

[] - Widar - 01-05-2005, 09:49 PM

[] - Ivan141 - 01-05-2005, 10:22 PM

[] - Ivan141 - 01-05-2005, 10:36 PM

[] - Mux213 - 01-05-2005, 11:26 PM

[] - NoHachi - 01-06-2005, 12:12 AM

[] - robokill - 01-21-2005, 05:12 PM

[] - KristianAE86 - 02-02-2005, 12:57 AM

today mounted.. - AndrE86 - 04-04-2005, 08:53 PM

[] - Tofu @ AE86 - 04-18-2005, 01:23 AM

some photos... - Tofu @ AE86 - 04-19-2005, 09:08 PM

Re: some photos... - KristianAE86 - 04-19-2005, 11:32 PM

[] - Tofu @ AE86 - 04-20-2005, 12:29 AM

[] - apardal - 04-20-2005, 11:41 PM

[] - ZaX - 04-21-2005, 09:53 AM

[] - KristianAE86 - 04-21-2005, 10:34 AM

[] - Tofu @ AE86 - 04-21-2005, 03:57 PM

[] - ZaX - 04-21-2005, 04:34 PM

[] - KristianAE86 - 06-06-2005, 02:21 PM

[] - Widar - 06-06-2005, 02:26 PM

[] - gt99 - 06-06-2005, 02:45 PM

[] - KristianAE86 - 06-06-2005, 09:50 PM

[] - Tofu @ AE86 - 06-06-2005, 10:34 PM

[] - Widar - 06-07-2005, 12:22 AM

[] - Dorito86 - 06-07-2005, 10:45 AM

[] - Widar - 06-07-2005, 10:55 AM

[] - KristianAE86 - 06-07-2005, 05:44 PM

[] - Widar - 06-07-2005, 09:09 PM

[] - KristianAE86 - 06-08-2005, 12:05 AM

[] - Widar - 06-08-2005, 12:47 AM

[] - Mux213 - 05-15-2007, 02:45 PM

[] - Bubble_Drift - 05-15-2007, 02:59 PM

[] - Mux213 - 05-15-2007, 03:17 PM

[] - Bubble_Drift - 05-15-2007, 03:25 PM

[] - Mux213 - 05-15-2007, 03:41 PM

[] - kungfumaster - 05-15-2007, 04:27 PM

[] - Mux213 - 05-15-2007, 04:42 PM

[] - DJexor - 05-15-2007, 06:27 PM

[] - DJexor - 05-15-2007, 06:30 PM

[] - DJexor - 05-15-2007, 06:34 PM

[] - Ivan141 - 05-15-2007, 06:37 PM

[] - DJexor - 05-15-2007, 07:29 PM

[] - kungfumaster - 05-15-2007, 08:18 PM

[] - Lipinhu - 05-15-2007, 09:04 PM

[] - Mux213 - 05-15-2007, 09:09 PM

[] - Ivan141 - 05-15-2007, 10:36 PM

[] - banpei - 05-16-2007, 02:08 PM

[] - Mux213 - 05-16-2007, 02:12 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Poly vs OEM bushings	Jezza_hr	5	7,774	05-14-2014 11:28 PM Last Post: Jezza_hr
	Steering Rack bushings	filh	4	6,124	03-12-2010 10:45 PM Last Post: filh
	Drivers review Prothane Bushings	Michel	11	17,383	04-13-2008 05:57 PM Last Post: Mux213
	Witch one to buy?(Bushings)	zounds	3	5,046	11-23-2006 12:03 AM Last Post: delange
	Bushings question.	CircuitFreak	18	17,472	06-20-2006 03:02 PM Last Post: Ivan141

User(s) browsing this thread: 2 Guest(s)