"eco" and "pwr"
04-11-2008, 06:05 PM
Post: #2
 
I believe it is not same problem, economy light just measure vacuum pressure in the manifold and lights the "power" light when vacuum drops, like on the moment when throttle flap opens wide or when engine is strained heavily.
The sensor is on the right side of the engine bay, on the strut tower. There goes one little hose from intake manifold and one wire. If you put the wire straight to ground, if i remember right, the "power" light goes on.
Find all posts by this user


Messages In This Thread
[] - Jousi - 04-11-2008 06:05 PM
[] - robokill - 04-11-2008, 07:18 PM
[] - Mikzu IV - 04-11-2008, 07:31 PM
[] - banpei - 04-12-2008, 10:42 AM
[] - daywalker - 04-14-2008, 08:41 PM
[] - max_ae86 - 04-15-2008, 08:53 AM
[] - Jousi - 04-15-2008, 05:38 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  ECON and PWR light troubleshooting magpie 3 1,639 07-18-2023 01:28 PM
Last Post: banpei
  PWR light issue and no brake fluid after winter storage magpie 10 2,637 05-25-2023 08:09 AM
Last Post: Bean
  EDM GT-S Cluster, PWR light VSV? Rascal21 1 3,970 06-25-2017 08:00 PM
Last Post: Rascal21
  what wheel size 13", 14", 15" use on hachi ? Ryo 22 18,254 07-26-2006 02:39 PM
Last Post: Ivan141

Forum Jump:


User(s) browsing this thread: 6 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication