MAPed Blue Top Swap, NOT staying running! Please Help?!
|
05-11-2008, 12:17 AM
Post: #19
|
|||
|
|||
No fuel... no go....
If the return hose is dry, you probably are not getting a proper fuel
supply to the rail. If there is fuel coming to the rail (pull one of the hoses and check), then the problem may be with the fitting of the pulsation damper (assuming that you have one). The pulsation damper looks much like the FPR, but without a vacuum hose. It attaches at the front of the fuel rail, on top of the banjo fitting that brings fuel into the rail. Above and below the banjo fitting are copper washers. One of them (the top one) is a thin washer with "teeth" on the inside diameter. If this has been replaced by a plain washer that is a close fit on the bolt, it can severely restrict the flow of fuel into the rail. If you don't have a pulsation damper, check for a blocked fuel filter, kinked hose or flattened hard line. Disconnect the hoses one at a time working away from the fuel tank, until you find the point where you lose flow/pressure. Cheers... jondee86 PS: Going down the shed to check some of this stuff now |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
No idle below 2000 rpm rich running | Steller Engineering | 3 | 1,393 |
11-30-2022 02:45 PM Last Post: RolanTHUNDER |
|
Red top in the ae86 | gh0st | 25 | 10,189 |
08-08-2022 08:43 PM Last Post: gh0st |
|
Running issues | sam3007 | 6 | 2,734 |
06-26-2022 01:34 PM Last Post: Dave W |
|
Replacing Top Windscreen Moulding | chrisae86 | 2 | 1,965 |
06-18-2022 08:56 PM Last Post: chrisae86 |
|
4age 16v running roughly - diagnostics shows unknown code | Ryo | 8 | 7,164 |
11-09-2020 10:51 AM Last Post: totta Crolla |
User(s) browsing this thread: 9 Guest(s)