My Tuned AE86 project

[Ian.G]

Nice work man.

have you done any work on intercepting the fuel level sender yet ?

from my readings the s2000 fuel level sender provides

in the s2k manual (page 11-120) it tells you about the sender that is in one of 2 places:

1. On the main cartridge if its a UK car
2. On it's own separate catridge if its a US/Cananda car (this drops straight into the ae86 tank - if you can find one).

It outputs for ranges based upon E 1/4 1/2 3/4 F



can you try converting this on your PIX board and see what you get ? do you know the pins on the cluster for fuel yet ? I think there are two sets - one set that drives the fuel gauge and another that drives the low fuel light.

On the AE86 side of things page (BE-26) in the manual describes the fuel level sender as so.





Any tests you could do based upon the above would be very useful as I have to do this myself as my sk2 powered car still runs the 86 fuel level sender.

Good work so far man.