4agze ae86 wiring.

[jono395]

Hi guys, I've fitted a GZE into my ae86. And I'm stuck with wiring. Mainly because, my GZE wiring has its own starter/ alternator loom in with the engine loom, and the ae86 starter/alternator looms are on the car.

I'm going to use the one already on the car, and cut mine out , but I need to connect this inside the car for it to work.

The colours I have to connect are these,

AE86 14 pin connector.../....GZE ECU connector

Batt live, red,white trace ...../.... Red,white trace
Ign live, black,red trace..../.... Black/red trace
Fuel pump trigger, green,red trace..../.... Green,red trace
Speed signal, blue,white trace..../.... Purple,white

In my GZE loom I have a thick black for a starter signal, but where do I connect this to?

Basically I need the wire colours to get this cranking.. Not just the ones to run the ECU.

I don't know what this pale yellow connector does in my ae86 , on the left of the picture.


Cheers

[ditn]

http://forums.club4ag.com/zerothread?id=90711

scroll to the bottom,there is a wiring guide there

[jono395]

It doesn't mention the starter wires... But I'll connect those up and see how I get on.. Cheers

[corolla4agze]

I did look that long time ago and i think there show all you need to make wiring harness