AE86 20V blacktop

[SutteR]

mr monster Wrote:i meant these [/img]

Hi,
what car are these rims from? I have two of them for my car but I don't know their origin. However I really like them...

[firehawk]

SutteR Wrote:what car are these rims from?

I think they are originally from an old rear-wheel drive Mitsubishi Galant.

[SutteR]

firehawk Wrote:

SutteR Wrote:what car are these rims from?

I think they are originally from an old rear-wheel drive Mitsubishi Galant.

Same "feeling" here but not sure...

[mr monster]

oh cool those seem to fit the ae86 well

[Hopi]

Denmark Wrote:ok,

You don´t have the part numbers for the valve seals,

Do you?


/Skassa

i think you should buy the full gasget kit, because it includes the valve seals and it costs as much as loose valve seals. in finland pay for it 196€ and here is a part number 04111-16330, TRD rod bearings 13281-AE902-05

[Hopi]

firehawk Wrote:

SutteR Wrote:what car are these rims from?

I think they are originally from an old rear-wheel drive Mitsubishi Galant.

correct!!

[Hopi]

project goes on. I got the parts back home, except the cylinder head, wich my friend still works on. valve face angles and seats are now modified. I prebuild the engine a little bit to get measure how much the pistons comes out from the edge of block. now that i know that i have to calculate the compression ratio. i´m going to use 12,5:1 compression ratio. here is a picture of it.



I ordered stiffer valve springs from super tech, which should arrive next week. i also ordered Hestec, wich is free programmable engine control unit. what i´m still missing is trd cylinder head gasket and adjustable camsaft timing pulley. luckuly i can get both of them in finland. today i did some painting. i paint few engine parts. color is toyota 1D2



next week my friend is going to paint my engine room as same color as the car. color is toyota 1E5. front coilovers are now fitted in the old "wheel poles" here is a bad picture taken with my phone


At the moment i´m starting to do some serious POWER drinking. Happy new year for everybody

[Rio_Cyber]

i spy fwd daily beater toyota

[ZDoman]

Hello Hopi

Nice project man!

Did you change something in the cyl.head (besides the valve springs) because of the high lift cams? e.g. valve train kit, valves or something like this?

[Denmark]

i think you should buy the full gasget kit, because it includes the valve seals and it costs as much as loose valve seals. in finland pay for it 196€ and here is a part number 04111-16330, TRD rod bearings 13281-AE902-05 "

This part number is this a full engine gasket kit or just the head?


Regards,
Skassa