|
AGX dampers
|
|
08-15-2008, 11:22 AM
Post: #19
|
|||
|
|||
|
I chose the SW20 front inserts (KYB Part# 765 015).
Because I wanted to use normal lowering springs (not make a coilover conversion) I cut 40 mm out of the strut above the perch, and welded the threaded section back on. Then I made some solid aluminum spacers about 20 mm high to go under the inserts. The inserts came without KYB gland nuts, and the OEM nuts do not fit the AGX inserts. So I had to machine some material from the inside of the OEM gland nuts to make them fit on the AGX inserts. I also shortened the OEM rubber bumpstops by one segment to obtain a bit more compression travel. Cheers... jondee86 |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
AGX dampers - Eric - 08-12-2008, 05:46 PM
[] - Sx-Machine - 08-12-2008, 06:39 PM
[] - Sx-Machine - 08-12-2008, 10:49 PM
[] - Sx-Machine - 08-13-2008, 03:24 AM
[] - Sx-Machine - 08-13-2008, 12:48 PM
[] - Sx-Machine - 08-13-2008, 04:29 PM
[] - Sx-Machine - 08-14-2008, 01:16 PM
[] - jondee86 - 08-15-2008 11:22 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Ae86 tein bonnet dampers? | irishboy1977 | 1 | 3,299 |
11-29-2011 01:28 AM Last Post: irishboy1977 |
|
| KYB AGX part numbers | eight-six | 5 | 11,152 |
07-02-2009 11:16 AM Last Post: eight-six |
|
| TRD blues front dampers | alex-evo | 3 | 5,050 |
10-16-2008 09:47 PM Last Post: jdm86gtz |
|
| Which Camberplates do fit on Koni Yellow dampers? | AshCampbell | 41 | 35,215 |
07-02-2008 04:28 PM Last Post: AshCampbell |
|
| Front dampers | totta Crolla | 3 | 4,332 |
11-16-2007 01:10 AM Last Post: oldeskewltoy |
|
User(s) browsing this thread: 7 Guest(s)