Aram's 3SGE Beams Levin Coupe

[Aram]

I'll answer in English before we get straf.

@Eineb,

This engine had nothing with it, I must find a computer to go with it.
Not sure what the option are yet.

@ Max,

I got them from Habo in Haarlem, the first 2 were 30 euro a piece, the third one was more expensive, something like 40 euro.
They did say the last one was harder to get, I'm not sure if that means the fender itself is hard to get nowadays.

@DJ ---> thanks.

[zenki]

Thx for the answer . I will probably pick up set of those fenders next month. First spend some more money on the daily

[Eric]

take a 20v computer form ebay, there are lots of them, most of them are auto computers but that can be solved by connetcing two wires.

[Aram]

N.p. Max, if it's to sticky you might try and cool it with ice, works even better.
I'd try dry ice.

Eric,

I'm new to the 20v idea so I'm still trying to search out some stuff.
In this case I'm a fan of tried and tested, no interest in pioneering here.

[einneb]

if you want to tune this engine, just get a KMS computer or something like that
then you can tune your computer with the net setup, and you can run a smooth engine

[danielvanderwoude]

http://forums.club4ag.com/zerothread?id=18900&page=3

you might wanna read this interesting treat. i bought some honda s2000 Coil On Plugs for a future project. the cool thing is that the waste spark setup is unbelievably simple and works just because the character of the 20v engine

[Aram]

@Einneb

Thanks, I'll look into that EMS.


@Daniel,

I've seen that link, but I'm undecided still.
I have to figure uot whats needed to get this thing running and what the best confguration for it.
Thanks for the info though.

[einneb]

KMS and DTA are very nice systems!

[Aram]

Cool mate, I'll check them out!

[Aram]

Today I sandblasted a few parts.
It actually doesn't look to shabby for such an old car.

The front ..... thingy's, no idea what they're called.
I want to seam weld them for extra strength:




Arms, with the reinforcement parts on them, only need to be welded:



And the front subframe, I seam welded it for strength, no idea if I did it correct though, or if it actually has any effect
If anyone has suggestions please say them:







Sorry for the crappy phone pics btw.