Can't get my car started!

[jondee86]

Generally speaking, the ECU has to receive certain signals from the
distributor and/or igniter before it will allow the igniter to trigger the coil.
Refer http://www.autoshop101.com/forms/h23.pdf for more information.

If you are getting one spark, then nothing, it suggests that the ECU is
not receiving the necessary signals. Check all the wiring connections
and plugs to the distributor and igniter. Look for loose connections, bad
splices, damaged insulation from heat, broken wires from flexing, places
where the insulation has worn away from rubbing against hard edges.

And pay special attention to the point where ther wires enter the dissy
as they flex a lot there... check inside the dissy as well. Good luck

Cheers... jondee86