Eibach camber bolts

[totta Crolla]

I have bespoke top mounts using Bilstein inserts and I cannot use camber
adjustable top mounts.
I would like to increase the front camber a little, max 1.5 degrees and I wondered if anyone had used LCA camber bolts or if they were worth a try ?

[Ivan141]

There is no bolt adjustment possible on an AE86 unless you cut and shut the LCA and put in a length adjustable rod end.

Only bolt on option besides camber plates is fitting NCRCA's. I have a pair here that I'm willing to part with if you're interested.

[NoHachi]

That or adjustable LCA's like nagisa's or T3's

[assassin10000]

You could also try different control arms. There may be a longer 'bolt-in' option out there.

http://www.toymods.org.au/forums/showthread.php?t=13452

IF you can find an T130 corona chassis the arms appear to be 10mm longer (which is about -1 deg camber on AE86). Or you can extend your stock control arms, either with heim joints or cut/weld. As with all other modifications, this is a dangerous thing to do so have an excellent welder do it.

Andrew