|
Final drive calculation.
|
|
11-20-2014, 10:42 PM
(This post was last modified: 11-20-2014 10:44 PM by oldeskewltoy.)
Post: #17
|
|||
|
|||
|
RE: Final drive calculation.
no BEAMS here.... but I am running about 30+% more power then most 4AGEs.
Way back when I owned my blk AE86 coupe... it had a mild cam, a bit of compression, and planted 112 whp (about 130 @ the crank), I used a 4.10. A stock 4AGE w/T50 can likely use the 4.10 with few side effects. In Surreptitious, when I had the 3.58... and an 8000 rpm redline... I was capable to do over 75 in 2nd gear  The current set up using the LEEN 6 speed gives me a 3.8 first gear (T50 is 3.5) this allows me a bit easier on the clutch when mixed with the 3.9 final... or when I had the 3.58 it made that easier too Dan - You can |  .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Gear end , drive pinion height | filh | 5 | 11,060 |
06-27-2013 12:29 AM Last Post: filh |
|
| 5.375 final drive ratio with stock T50 | 4000GT | 23 | 25,848 |
08-07-2012 01:08 PM Last Post: 4000GT |
|
| Final Drive ratio - need advise | KD2229 | 12 | 15,940 |
08-26-2011 08:33 AM Last Post: totta Crolla |
|
| U-joint on drive shaft - Beams 6s box | KD2229 | 3 | 5,048 |
08-18-2011 03:59 AM Last Post: KD2229 |
|
| guy with some questions about drive train. | projectfert | 4 | 4,537 |
06-22-2011 06:04 AM Last Post: projectfert |
|
User(s) browsing this thread: 2 Guest(s)