cylinder head.
05-07-2011, 06:10 AM
Post: #11
cylinder head.
You have an AE85, not AE86...
Find all posts by this user
05-07-2011, 08:55 AM
Post: #12
cylinder head.
In the US an AE86 is SR5 SOHC and the AE88 is GTs I think Smile

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - cylinder head.]
Visit this user's website Find all posts by this user
05-07-2011, 12:09 PM
Post: #13
cylinder head.
Jep, there are 4AC AE86's, mine was one originally as well.

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user
05-07-2011, 01:29 PM
Post: #14
cylinder head.
Correct, certain countries like Australia got ae86 with a 4ac, makes you wonder what th point of an ae85 was?

An 86 is for Life, not just for Christmas
Find all posts by this user
05-08-2011, 02:09 PM
Post: #15
cylinder head.
Its just a chassis code.. still sold as a corolla, its mostly us reading too much into it after being indoctrinated by InitialD Smile

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user
05-08-2011, 04:42 PM
Post: #16
cylinder head.
Whilst you could fit a 16v 4AGE you'll need all the bits that go with it, ECU loom etc.

If you have drums on the rear chances are you won't have an LSD as LSD wouldn't come with this axle.

Again you can change to AE86 running gear, you just need to find all the parts so you will likely need engine, gearbox, axle etc, so replace the lot. Not sure if the props or not are different.

1985 Sprinter Trueno GT Apex
2013 GT86 Miltek Exhaust, Injen Induction.
Visit this user's website Find all posts by this user
05-08-2011, 06:18 PM
Post: #17
cylinder head.
AE85 uses 3AC

If it has a 4A in it(4AC, or 4AGEC, or 4AGE) it is an AE86. AE88(4AGE equipped) is part of the vin, but the chassis is still an AE86

rear brakes have nothing to do with chassis code

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user
05-08-2011, 10:03 PM
Post: #18
cylinder head.
Well according to the Toyota EPC Nort America never had the AE85 named frame - just AE86 in three models DX, SR5 and GTS

I guess your model code (that's the important thing) is AE86L-ESMXCA

which means a US SR5 model with 2 doors, 5 shift manual transmission and a 4AC engine

if the S in the code is a C it reffers to the 3 door model

all found in the EPC or here online http://www.toyodiy.com/parts/g_U_1985_TO...SMXCA.html

Wink

The model code is the most specific one and pending on that things like brakes, AC, servo, etc differ - that's also where the difference in the European versions is regarding the engine variations with different CR Pistons, emission add-ons and so forth.

AE86 ex-daily
Visit this user's website Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  4AGE cylinder head plug removal Ivan141 5 1,999 09-30-2023 09:47 PM
Last Post: Ivan141
  Brake advice - master cylinder mannix20vt 12 13,874 08-21-2017 03:21 PM
Last Post: Project D
  Correct connection brake master cylinder? bozu 5 7,156 07-26-2015 12:28 PM
Last Post: bozu
  torque setting head cylinder bolts izanagi 1 4,860 05-29-2015 01:23 AM
Last Post: oldeskewltoy
  Dimensions clutch master cylinder bozu 2 6,049 04-16-2015 07:11 AM
Last Post: bozu

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication