Help on Tyre selection - asap - PLEASE!

[jondee86]

totta Crolla Wrote:Nice looking '86 there Jondee
Can you please tell me the rim width and the offset of those wheels...

13 x 7 negative 7 offset. Mine were made by Performance Wheels in
Australia. They are a copy of the original Superlite/Minilite wheels.

Cheers... jondee86

[totta Crolla]

Perfect for my rally car
No spacers and standard length studs ?

[Okami]

Mine come from Ultra-Lite

13 inchers - 7J
ET -7

No spacers required as you can see on my car is also without spacers.

[jondee86]

As said... no spacers and standard length wheel studs. If the car is quite
low, with soft springs, you will get some minor rubbing on the guards. But
on a rally car you probably are riding close to stock height, so not an issue.

Very popular wheel on AE86's in Ireland

Cheers... jondee86

[totta Crolla]

yes, although mine is primarily a tarmac car I don't run it particularly low probably stock -10mm
Actually it would be nice to know the reference against stock height.
Does anyone have a measurement for this under the arch ?
I have the measurement for the front and rear suspension pickups but not under the arch.