High engine oil temps - oil cooler discussion

Threaded Mode | Linear Mode

High engine oil temps - oil cooler discussion

06-02-2008, 03:05 PM

Post: #8

speed-inc Offline

Senior Member

Posts: 580
Joined: May 2007
Reputation: 0

Hi guys

I also run a double original setup with a thermostat switching from one to both.

2 will increase cooling capacity quite a bit and without a thermostat it takes some time to warm up the oil.

I do not have an oil temp anymore but when I had one the temps were always stable around 100-110°C
Was never on track though with the temp readouts though.

My personal opinion is though that an aftermarket oilcooler would be the better choice if you can spend the money. This is just from what I have heard though and not from my own experience.
And a plus is that you can get a oilfilter relocation kit with it which makes filter changes much easier.

If pics are needed of the double setup, let me know.

Speed Industries
Hurdnerwaeldlistr. 73
8808 Pfaeffikon
Switzerland
e-mail: [email protected]
phone: +4155 420 15 69
page: http://www.speed-industries.ch
MSN: [email protected]

We have all the parts your Hachi needs

« Next Oldest | Next Newest »

Messages In This Thread

High engine oil temps - oil cooler discussion - SutteR - 06-02-2008, 10:32 AM

[] - robokill - 06-02-2008, 02:27 PM

[] - [Walaki]D`Lair - 06-02-2008, 02:29 PM

[] - robokill - 06-02-2008, 02:46 PM

[] - SutteR - 06-02-2008, 02:49 PM

[] - SutteR - 06-02-2008, 02:50 PM

[] - alimonos - 06-02-2008, 02:56 PM

[] - speed-inc - 06-02-2008 03:05 PM

[] - SutteR - 06-02-2008, 03:08 PM

[] - speed-inc - 06-02-2008, 03:22 PM

[] - SutteR - 06-02-2008, 03:37 PM

[] - speed-inc - 06-02-2008, 03:55 PM

[] - Gtsi-R - 06-02-2008, 04:04 PM

[] - Miguel - Newera - 06-03-2008, 06:02 AM

[] - 4agze - 06-03-2008, 07:25 AM

[] - SutteR - 06-03-2008, 08:36 AM

[] - 4agze - 06-03-2008, 08:57 AM

[] - SutteR - 06-03-2008, 09:01 AM

[] - 4agze - 06-03-2008, 09:28 AM

[] - SutteR - 06-03-2008, 09:36 AM

[] - Jan Pedersen - 06-04-2008, 07:56 AM

[] - 4agze - 06-04-2008, 08:54 AM

[] - 4agze - 06-04-2008, 09:15 AM

[] - SutteR - 06-05-2008, 11:14 AM

[] - Jan Pedersen - 06-05-2008, 12:48 PM

[] - SutteR - 06-05-2008, 12:53 PM

[] - Jan Pedersen - 06-05-2008, 12:58 PM

[] - eight-six - 06-08-2008, 11:23 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	High-beam warning lamp	Mylesmck	4	1,426	07-21-2023 07:44 AM Last Post: banpei
	Mocal oil cooler & sandwitch plate ordered	Gtsi-R	48	54,649	11-18-2022 02:19 PM Last Post: FanIsHere
	Engine stress at high speeds	gh0st	6	2,404	08-30-2022 07:11 PM Last Post: Power_uP
	Oil cooler	totta Crolla	0	1,533	07-25-2021 03:25 PM Last Post: totta Crolla
	4AGE 16V engine overheat when at high speed	chenfon	32	20,922	12-31-2020 06:39 AM Last Post: chenfon

User(s) browsing this thread: 3 Guest(s)