Levin Coupe from Croatia - NOW SR86 with IRS

[ZaX]

I'm @work, bored so I decided to attach some pictures.

[ZaX]

I should really fit something like this under the ae86 bonnet...

[jamiemirror]

ZaX, before sending the blue one to the junkyard, cut some front and rear-side body parts :-)
At the moment my donor-car saves my pocket (after chain accident with my AE86).

[Mux213]

Zax,

I agree with Jamiemirror, cut the car up and spare any body panels that are usable at a later date for people who's car is rusted in area's this body has good bits for.

There was a guy on the dutch forum that needs some body parts for his 3 door levin, maybe you can sell it.

[ZaX]

Yesterday I removed the oil pan and found out that my big end bearing is worn, two of them spun, making some litlle damage to the crankshaft. So now I need set of new bearings for 7rib red top.





Anybody knows part no for big end bearings for smallport, 7 ribs ?

[Ivan141]

You probably know this yourself, but get the crankshaft machined to a perfect surface again, and have them check it for straightness. Then get slightly oversized bearings to match.

[ZaX]

After 8 months of waiting i've finally received my set of konig rewinds 15"x7", gunmetal gray.






My garage, yesterday, started to remove the engine

[Dorito86]

Good luck ZaX. The wheels are sweet.

[banpei]

Cool! You finally received them?

[alimonos]

I'm so freaking jealous man!!!