AEU86 : EU AE86 Community - AE86 - AE86 : Technical v - My 20v ITB installation

My 20v ITB installation
01-11-2005, 09:37 AM
Post: #13
Ian.G Offline
Posting Freak
*****
 		Posts: 762
Joined: Oct 2004
Reputation: 0
 
Gon,

my car no longer runs the stock ECU. It has a Freedom computer from Japan controling fuel and ignition. I think Paz from Driftworks will be running ITBS on the stock ECU soon so it will be interesting to see how it runs.

Good news !!! Mr postman delivered me a package this morning. I was expecting gaskets and cam gears but the package was the wrong shape.

T3/Gabe has come through again - my new ITB trumpets are here and the quality is amazing !!! will try and take some photographs later.

I just need to order the filter socks now and get a spare hour to install them (I have to clean all the mess from the mounting surfaces on my ITBS first).

I'm going to the Autosport international show on friday so should be able to pick some filters up there. The HKS S15 Genki drift car driven by Nob is also on display so that should be good to see.

I was going to use the orange gasket goo to mount them up and then clean away the excess when they are bolted up (obviously being careful to make sure none goes into my intakes). Does this seem like a good idea ?
Regards Ian.
[Image: AEU86 AE86 -  ]
Visit this user's website Find all posts by this user


Messages In This Thread
My 20v ITB installation - Ian.G - 12-31-2004, 05:43 PM
[] - Squeejy - 12-31-2004, 06:04 PM
[] - Ian.G - 12-31-2004, 06:48 PM
[] - ZaX - 12-31-2004, 08:23 PM
[] - Squeejy - 12-31-2004, 08:50 PM
[] - Ian.G - 01-01-2005, 11:55 AM
[] - ZaX - 01-01-2005, 01:28 PM
[] - Mux213 - 01-01-2005, 01:52 PM
[] - Ian.G - 01-01-2005, 02:11 PM
[] - Ivan141 - 01-01-2005, 02:38 PM
[] - Ian.G - 01-01-2005, 03:16 PM
[] - gon - 01-07-2005, 10:58 PM
[] - Ian.G - 01-11-2005 09:37 AM
[] - mo-racing - 01-11-2005, 09:58 AM
[] - mo-racing - 01-11-2005, 10:00 AM
[] - Ian.G - 01-11-2005, 10:38 AM
[] - mo-racing - 01-12-2005, 08:58 AM
[] - Widar - 01-12-2005, 09:07 AM
[] - mo-racing - 01-12-2005, 09:40 AM
[] - The Doctor - 01-12-2005, 12:52 PM
[] - JFR - 01-12-2005, 10:46 PM
[] - Ian.G - 01-13-2005, 09:44 AM
The mess is gone... - Ian.G - 01-15-2005, 08:40 PM
[] - rikard - 01-15-2005, 08:47 PM
[] - Mux213 - 01-15-2005, 08:49 PM
[] - Widar - 01-15-2005, 10:37 PM
[] - Ivan141 - 01-15-2005, 11:09 PM
[] - Ian.G - 01-16-2005, 03:19 AM
[] - ZaX - 01-16-2005, 11:25 AM
[] - Striker - 01-16-2005, 07:06 PM
[] - Ivan141 - 01-16-2005, 08:43 PM
[] - Mux213 - 01-16-2005, 09:32 PM
[] - Striker - 01-17-2005, 12:41 AM
[] - Ivan141 - 01-17-2005, 01:13 AM
[] - Striker - 01-17-2005, 01:25 AM
[] - gon - 01-17-2005, 01:44 AM
[] - Striker - 01-17-2005, 01:55 AM
[] - AndrE86 - 01-17-2005, 08:45 AM
[] - Striker - 01-17-2005, 05:39 PM
[] - NoHachi - 01-17-2005, 05:54 PM
[] - s.bjelke - 01-17-2005, 06:03 PM
[] - Striker - 01-17-2005, 06:12 PM
[] - ZaX - 09-06-2005, 11:55 AM
[] - Ian.G - 09-06-2005, 12:42 PM
[] - ZaX - 09-06-2005, 12:49 PM
[] - SilentScope111 - 06-16-2007, 04:56 AM
[] - byd1380 - 06-18-2007, 02:19 PM
[] - robokill - 06-24-2007, 06:23 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  4A-GE 20V ITB bolt patterns kjb 7 11,799 02-27-2016 01:23 PM
Last Post: kjb
  How to install 20V ITB on 16V head Mr.komp 7 11,659 12-28-2015 05:35 PM
Last Post: pack
  Machining Pistons to run 20v head... And FCR's on a 20v? PazzaAE86 2 5,065 09-15-2013 01:08 AM
Last Post: jondee86
  20v itb inlet manifolds totta Crolla 24 26,280 12-14-2012 12:21 PM
Last Post: Bean
  4AGE 20v ITB vacuum instructions on Intecracing.com JAVResistance 17 33,743 05-07-2011 05:50 AM
Last Post: jondee86

Forum Jump:


User(s) browsing this thread: 7 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication