My 4AGE N/A build

[Lewy]

Well It looks like ive killed my 4AGE so im looking at doing a rebuild and ive been collecting parts with the aim of the following spec

AWT polish and ported head with arrow shim under bucket kit with cat cam springs
Toda adjustable pulley's
Toda pistons with comp ratio of 11.3:1
Brian Crower forged Rods
Toda 1mm head gasket
ARP head stud and nut kit
Toda cambelt
ACL race bearings
New toyota pumps
my Mikuni 48mm Carbs on the Ported and polished HKS inlet manifold

I have 2 sets of cams to choose from for this build and id like some advice on wich you guys think would be best for this application

first i Have Catcams duration 278 / 266°, duration 254 / 242° Max lift 11.80 / 11.05mm lift at TDC 3.65 / 2.90mm

Secondly i have a set of Toda cams with a 310 duration and a 10.5mm lift (inlet and exhaust the same)

Also is there any problems you can for see with the proposed spec of this engine ? Ill also be building a slightly less well spec motor aswell for spare.

thanks