My little (not really...) project - Soon to be all done?!?
11-24-2011, 08:58 PM
Post: #481
My little (not really...) project - Soon to be all done?!?
The second box just got in today straight from the UK Thumbs up!
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

Yeah the high mid end is quite good but it needs a better exhaust to free the last 10 hp at 7.5k rpm Cool And since my old exhaust broke at the last trackday I might do something about it Smile

However I do believe that the new gearbox will do more good than a bit of extra power Smile

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user
11-25-2011, 12:36 PM
Post: #482
My little (not really...) project - Soon to be all done?!?
A gearbox with good gear ratios can disguise a bad engine (which is not the case) and a gearbox with bad gear ratios can ruin a good engine.

Keeping the AE86 alive!
Find all posts by this user
12-17-2011, 12:01 PM
Post: #483
My little (not really...) project - Soon to be all done?!?
Yummie! awsom som day you will get it back on the street rightSmile lol
Visit this user's website Find all posts by this user
12-17-2011, 11:09 PM
Post: #484
My little (not really...) project - Soon to be all done?!?
It is, Mikkel - well not now durring the winter - but it has been running all season. Including two trips to the Nürburgring Wave

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user
01-05-2012, 12:30 PM
Post: #485
My little (not really...) project - Soon to be all done?!?
Yep it is.
Okey sweet i hope the 6speed Will work then i want one alsoSmile
Visit this user's website Find all posts by this user
06-18-2012, 06:45 PM
Post: #486
My little (not really...) project - Soon to be all done?!?
T50
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

Lexus IS200 AZ6
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

T50 clutch housing:
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

AZ6 clutch housing:
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

Final measuring...
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

...Before milling:
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

To be continued...

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user
06-18-2012, 09:08 PM
Post: #487
My little (not really...) project - Soon to be all done?!?
why you just make adapter plate between is stock is bellhouse and a engine. not hard to do and you dount need to ruin t50-a engine bellhouse


i do whit stock is bellhouse and adapter
Find all posts by this user
06-19-2012, 10:34 AM
Post: #488
My little (not really...) project - Soon to be all done?!?
Thats not possible or at least very hard to do. There aren't enough room for the bolt heads...

My friend Martin did make an adaptor for his 3SGE AZ6 which has a bigger housing... And that wasn't easy either :wink: It is working, though, and the 3, 4, 5, 6 are layed out real nice for the Ring Hurray!

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user
06-19-2012, 06:56 PM
Post: #489
My little (not really...) project - Soon to be all done?!?
very easy to make adapter. just use the bigger genuine is200 bellhouse and then from alumium make adapter to engine. bolt the aluminium to block and then holes to fit is200 bellhouse to it.

IF i could do it in my garage every one else can to. Good drill and some saw to cut shape. Measure measure and cut onse.
Find all posts by this user
06-19-2012, 06:59 PM
Post: #490
My little (not really...) project - Soon to be all done?!?
very easy to make adapter. just use the bigger genuine is200 bellhouse and then from alumium make adapter to engine. bolt the aluminium to block and then holes to fit is200 bellhouse to it.

IF i could do it in my garage every one else can to. Good drill and some saw to cut shape. Measure measure and cut onse.


[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Ivan's coupe: bodywork is done Ivan141 676 796,463 08-07-2024 08:46 AM
Last Post: banpei
  (Catching up...) OST-082: Nope, never again... at least not without all the parts oldeskewltoy 0 1,529 06-28-2022 09:17 PM
Last Post: oldeskewltoy
  OST-066: I get all wavy (4AC content) oldeskewltoy 10 14,011 04-03-2020 04:29 PM
Last Post: Power_uP
  d3nso's little AE86 N2 build d3nso 27 34,660 11-13-2017 11:42 AM
Last Post: mad.matt
  Doc's KE20: - really coming together now The Doctor 548 517,989 08-03-2011 11:57 AM
Last Post: The Doctor

Forum Jump:


User(s) browsing this thread: 37 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication