OEM sway bar thickness ??

[T_AE86]

Hi mates, i searched in the forum but i didn't find nothing

I want to buy a prothane bushing kit (total) for my zenki and i saw in the prothane page that exsist two sway bar thickness

Anybody knows the OEM Sway Bars thickness (Zenki and kouki)?

I read that front are 22mm or 21mm and rear 14mm or 16mm.

Thanks!!

[MatthewG]

Hey,

normally both come with the Kit, the smaller one is for the SR-5 version..

greets martin

[Ozone]

Tthe larger bars (22 and 16) were fitted in the US.
Japan and Europe came with the smaller bars (21 and 14).
SR5 came with smaller front (21) and nothing at the rear.

Note, the US rear bar (16) is the same diameter as the TRD bar.
(TRD front is 24.25)

http://forums.club4ag.com/zerothread?id=4617

[T_AE86]

Ok, thanks!

A friend buyed recently the 18-2010 prothane kit, and it came whith the USDM 21 and 16mm and like "extra included" 21 and 14mm bushes. I think i'll not have problems

Cheers

[Hachi]

this is the answer i got from T3 when i asked for extra bushings...

"The kit comes with extra bushings to fit the front swaybar U-Brackets. Depending on whether the car has a Stock SR5, GTS, or TRD swaybar. So you will end up with a few extra bushings after the install."