OST-026: "My White Hatch"

[oldeskewltoy]

krullibull Wrote:Hmm. Number 3 looks to be worst from the photos but just becasue of that I'm going to say number 2

Reminds me (your indecision) of an old "Let's Make a Deal" (Monty Hall era)....



"Well, contestant, your first instinct was correct, you should have stuck with chamber #3........"

"oh Monty..."


The reason I chose #3 was the factory machining mark came right to the edge of the seat, it had a big nasty under cut in the port floor, and the splitter was poorly machined covering a big part of the seat.



Besides the bowl work... can anyone tell me what else I did that isn't inside the bowls?



Once I managed to get the bowls, and short radius worked out, it was time to begin the port work...



Look past the short radius, into the port. The left side has been reshaped, note the light line from port face to the guide. The right side I've not yet touched, and you can see the "pocket" in front of the guide that I have yet to "excavate"





All the rough work has been finished on the left(#3), you can see the bowl walls are beginning to blend into the port, the bowls, seats and ports on the right(#2) are still untouched.

oldeskewltoy Wrote:I'll be earning my fee on those....... :lol:

nearly 6 hours worth of work on #3's seats, bowls, and port.



More to come.....