Question on Rod Bearings

[mister86]

Hey everyone, I have a question that I hope you can help me. I am replacing my rod bearings and it looks like I have the wrong ACL ones. I have the early type 40mm crank with the 18 pin size, not the 20 size.

So I am trying to figure out which bearings (ACL, King, etc) is the correct one to get because the set I purchased from MRP doesnt work. Let me know. Thank you!

[oldeskewltoy]

Any chance you have access to Rockauto??

https://www.rockauto.com/en/catalog/toyo...aring,5212

[mister86]

(03-18-2020 05:53 PM)oldeskewltoy Wrote:  Any chance you have access to Rockauto??

https://www.rockauto.com/en/catalog/toyo...aring,5212

I do. which one do I need to get? or any of them?

[oldeskewltoy]

(03-18-2020 06:01 PM)mister86 Wrote:  

(03-18-2020 05:53 PM)oldeskewltoy Wrote:  Any chance you have access to Rockauto??

https://www.rockauto.com/en/catalog/toyo...aring,5212

I do. which one do I need to get? or any of them?

Toyota bearings are also still available.... what I would do... is get the crank journals measured before you buy bearings... all the journals... - Why? you might just order (ask your machinist first) oversize bearings and machine the crank to fit the tolerance you want. Tolerances are in the FSM