TRD Short Shifter Rattle Noise, It's Normal?
05-05-2015, 06:03 PM
Post: #1
TRD Short Shifter Rattle Noise, It's Normal?
Hi to all, just one week ago I mounted a new TRD Short Shifter kit.
When I arrive at 5000 RPM in any gear, from T50 coming out a rattle noise.
It's Normal?
Find all posts by this user
05-05-2015, 07:48 PM
Post: #2
TRD Short Shifter Rattle Noise, It's Normal?
If it's the shifter rattling then you might need a new bushing on the bottom of it....

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user
05-05-2015, 10:45 PM
Post: #3
TRD Short Shifter Rattle Noise, It's Normal?
IIRC the TRD shifter doesn't have any bushings inside the assembly. The shift lever pivots on the casting. It's supposed to provide a more direct feel at the expense of nvh. I've never had one but from what I understand they're known to rattle.
Find all posts by this user
05-06-2015, 09:01 AM (This post was last modified: 05-06-2015 09:02 AM by Ivan141.)
Post: #4
TRD Short Shifter Rattle Noise, It's Normal?
There is supposed to be a bushing around the little ball at the end of the gear lever where it slots into the gearbox. It's an OEM part which is often worn out, causing the shifter to have too much slack.
I think T3 even made delrin replacement bushings for it.
https://technotoytuning.com/toyota/ae86/...86-corolla

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user
05-06-2015, 10:00 AM (This post was last modified: 05-06-2015 10:01 AM by Mattolo.)
Post: #5
TRD Short Shifter Rattle Noise, It's Normal?
The bushing it's included in new kit, I'll try it, cusco bushing:

[Image: AEU86 AE86 - TRD Short Shifter Rattle No...'s Normal?]
Find all posts by this user
05-07-2015, 01:18 PM
Post: #6
TRD Short Shifter Rattle Noise, It's Normal?
ok, I tryed to mount the cusco bushing kit, the rattle noise it's reduced, but it exist.
I read on the web that a solution maybe a Shift knob heavier?
Find all posts by this user
05-07-2015, 01:42 PM
Post: #7
TRD Short Shifter Rattle Noise, It's Normal?
I've been successful using foam rubber packed inside the shifter boot. You could also try adding solder warped around the shift lever. [ at the top] Keep adding more until you change the natural frequency, of the lever. If that works, then you should try finding a shift knob with approximately the same additional wt. Dave W
Find all posts by this user
05-07-2015, 07:40 PM
Post: #8
TRD Short Shifter Rattle Noise, It's Normal?
Yes, it's normal, that's why I installed one and removed the day after... Too much race environment for me.


Enviado do meu AiFone

Keeping the AE86 alive!
Find all posts by this user
05-08-2015, 01:03 PM (This post was last modified: 05-08-2015 01:03 PM by Mattolo.)
Post: #9
TRD Short Shifter Rattle Noise, It's Normal?
(05-07-2015 07:40 PM)Rasteirinho Wrote:  Yes, it's normal, that's why I installed one and removed the day after... Too much race environment for me.


Enviado do meu AiFone

I think that the TRD Short Shifter It's not for daily use..... for now I leave it installed until I'm going crazy for rattle noise Big Grin Big Grin


thank you guys for your advices!
Find all posts by this user
05-08-2015, 11:45 PM
Post: #10
TRD Short Shifter Rattle Noise, It's Normal?
TRD shifter stripped of all extra weight for racing...
[Image: AEU86 AE86 - TRD Short Shifter Rattle No...'s Normal?]

C's short shifter reputed to be the best AE86 shifter money can buy...
[Image: AEU86 AE86 - TRD Short Shifter Rattle No...'s Normal?]
... and the C's shifter does not rattle Wink

Cheers... jondee86
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Clicking noise from glove box chrisae86 4 1,915 09-08-2022 11:36 PM
Last Post: chrisae86
  Noise Insulation for AE86 decryphe 1 3,991 11-03-2016 11:51 AM
Last Post: mad.matt
  What is normal and low caster in Cusco camber plates?? T_AE86 9 15,079 01-07-2016 02:56 AM
Last Post: Deuce Cam
  Whining noise HELP PLEASE izanagi 10 12,094 03-26-2015 06:48 PM
Last Post: Komba
  Whining noise only in 4th & 5th. izanagi 7 10,555 09-25-2014 07:09 PM
Last Post: Uzelac

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication