AEU86 : EU AE86 Community - AE86 - AE86 : Technical v - The old Crown Wheel and Pinion whining questions...

The old Crown Wheel and Pinion whining questions...
01-10-2011, 09:29 AM
Post: #6
Jezza_hr Offline
Posting Freak
*****
 		Posts: 894
Joined: Jan 2005
Reputation: 0
 
allencr Wrote:
Jezza_hr Wrote:I just wanted to be sure that what I'm hearing/feeling is normal after installing a new CW&P set.

NO, it is not normal and does not need any specific running/bedding in and it will not get better, only worse or it will just stay almost the same for a looong time if its bad setup isn't too far off.
The new bearing's pre-load may have been setup on the high side so it will have some resistance for the first few hours or so. It will be generating some extra heat. Don't plan on climbing Pikes Peak or pulling a trailer for 1000km/600mi.

So, wouldn't the bearings require a minor amount of bedding in to calm the resistance and noise?
Find all posts by this user


Messages In This Thread
[] - jondee86 - 01-10-2011, 02:02 AM
[] - Jezza_hr - 01-10-2011, 02:13 AM
[] - jondee86 - 01-10-2011, 02:27 AM
[] - allencr - 01-10-2011, 03:38 AM
[] - Jezza_hr - 01-10-2011 09:29 AM
[] - allencr - 01-11-2011, 12:55 AM
[] - fax0815 - 01-11-2011, 02:33 AM
[] - Jezza_hr - 01-11-2011, 09:41 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  20v Silvertop - New Haltech ECU & Couple of questions 20valver 10 2,745 05-26-2024 07:40 PM
Last Post: totta Crolla
  Windscreen stoopid(?) questions.... Mylesmck 7 1,357 04-30-2024 09:46 PM
Last Post: Mylesmck
  Brake Bias Questions mad.matt 10 11,682 01-03-2019 04:54 AM
Last Post: mad.matt
  DIY: a quick outline on why & how to set pinion angle. assassin10000 9 18,726 12-21-2016 10:28 PM
Last Post: ditn
  Rebuild rear disc brakes toyota crown ms112 axle bozu 0 3,861 12-21-2016 09:37 PM
Last Post: bozu

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication