|
driveline vibration TE71
|
|
02-25-2014, 03:19 AM
Post: #8
|
|||
|
|||
|
Thanks to the wonderful AEU86 archives, I found this...
![[Image: AEU86 AE86 - ]](http://i79.photobucket.com/albums/j143/oldeskewltoy/ae71/driveshafts2.jpg "AEU86 AE86 -") There is a square flange that you can see, that gets taken apart when changing the hanger bearing. AFAIK it is possible to assemble that flange 90 degrees wrong i.e. out of phase. Cheers... jondee86 EDIT: And you also need to check the hanger bearing is not loose and flopping around. Grab the driveshaft next to the hanger bearing and push pull vigorously. The rubber should hold the shaft firmly with not much movement. If the rubber is perished/broken and the shaft moves 20mm up and down, you need a new bearing. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
driveline vibration TE71 - teun - 02-24-2014, 04:45 PM
[] - jondee86 - 02-25-2014 03:19 AM
Re: driveline vibration TE71 - jondee86 - 02-25-2014, 10:37 AM
[] - totta Crolla - 02-28-2014, 06:15 PM
[] - oldeskewltoy - 03-03-2014, 01:29 AM
[] - totta Crolla - 03-07-2014, 03:28 PM
[] - totta Crolla - 03-07-2014, 10:36 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Decently heavy vibration in fourth gear between 2000-2300rpm | dinkers542 | 4 | 5,462 |
11-29-2014 12:27 AM Last Post: dinkers542 |
|
| Problems installing yellow koni's in my TE71 liftback | teun | 12 | 15,470 |
11-09-2013 03:01 PM Last Post: teun |
|
| Will ae86 stock springs fit TE71 liftback ? | Ryo | 19 | 25,672 |
05-04-2011 05:21 AM Last Post: ash16valve |
|
| TE71: 2T-B engine thermostat opening temperature ? | Ryo | 1 | 3,529 |
04-06-2011 07:28 PM Last Post: Ryo |
|
| TE71 roll cage | totta Crolla | 3 | 5,208 |
02-04-2011 05:43 PM Last Post: corolla4agze |
|
User(s) browsing this thread: 34 Guest(s)