Threaded Mode | Linear Mode

nikos_trd · 10-13-2013, 09:39 PM

hello i make a swap...ke 70 with 4age 16v.it is important to put the oil cooler?the use they will be for every day jobs...nothing else...

jondee86 · 10-14-2013, 07:40 AM

If you are talking about the Toyota factory oil cooler with a return hose
into the oil pan, then not important.

The factory cooler is a by-pass type, and oil is only sent to the cooler
when the rpm's (and oil pressure) are high. At lower rpm's the spring-
loaded bypass valve is closed, and no oil is sent to the cooler. So for
normal around town driving the cooler is just extra weight.

Cheers... jondee86

Alex170984 · 10-14-2013, 03:32 PM

Before I rebuilt my engine I was running a corolla sump and obviously couldn't connect up my aw11 oil cooler arrangement and never had any issues. Have since bought an aw11 sump with the oulet.

nikos_trd · 10-14-2013, 07:36 PM

yes i am talking for the toyota factory oil cooler....
thanks guys!!!!

Apsogos · 10-20-2013, 07:43 AM

jondee86 Wrote:If you are talking about the Toyota factory oil cooler with a return hose
into the oil pan, then not important.

The factory cooler is a by-pass type, and oil is only sent to the cooler
when the rpm's (and oil pressure) are high. At lower rpm's the spring-
loaded bypass valve is closed, and no oil is sent to the cooler. So for
normal around town driving the cooler is just extra weight.

Cheers... jondee86

i have replaced my oem oil cooler with a new better one (handmade) , i want to ask if you know at how many rpms the valve opens? thank you

Apsogos · 10-27-2013, 08:30 AM

Apsogos Wrote:
jondee86 Wrote:If you are talking about the Toyota factory oil cooler with a return hose
into the oil pan, then not important.

The factory cooler is a by-pass type, and oil is only sent to the cooler
when the rpm's (and oil pressure) are high. At lower rpm's the spring-
loaded bypass valve is closed, and no oil is sent to the cooler. So for
normal around town driving the cooler is just extra weight.

Cheers... jondee86

i have replaced my oem oil cooler with a new better one (handmade) , i want to ask if you know at how many rpms the valve opens? thank you

and a second question that i have is if anyone know how much pressure from 0 oil psi or bar shows the climax on the oem gauge (ae92)

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Mocal oil cooler & sandwitch plate ordered	Gtsi-R	48	54,611	11-18-2022 02:19 PM Last Post: FanIsHere
	Oil cooler	totta Crolla	0	1,524	07-25-2021 03:25 PM Last Post: totta Crolla
	Oil cooler kit	izanagi	7	8,529	09-20-2016 11:13 AM Last Post: harkes
	Permanent oil cooler vs thermostat	Lt86	19	20,531	03-28-2015 06:54 PM Last Post: Lt86
	trans oil, lsd oil change	Apolan	9	16,881	10-01-2014 03:57 PM Last Post: mad.matt