problem with defi rpm gauge

[fax0815]

Since I made a proper center console I had to take of the defis and the control unit. Unfortunatly I couldn´t get/ see the cylinder selection switches before.

As a few suggested, I´m stupid and can not set up a very basic controlunit, even with a printed manual.
I was on the 4 cylinder setting, but the wrong way around.
You need to have a good look inside the plasic housing, there are little white numbers printed on the switches. To set it up right you need to turn the unit upside down, which I just didn´t expect when I set it up the first time.

So yeah, nothing wrong with the dizzy signal, or the signal going to the tacho.