New ride - Starlet kp62

[banpei]

Hmmmm, this is really interesting:
Belgian Starlet P60
In excellent state and if I would import it to Holland it would only require MOT because the car is 26 years old.

Too bad I really want a hachi.

[Jan Pedersen]

Thanks for your comments, guys!

Mo do you have any ideas for cheap performence mods?

And I still woulf like to know if I can use the 280 deg cam without changing anything else...

[ZaX]

What about this? S2200 engine in starlet!!!










Modified Toys Starlet (KP61) with a 2004 S2000's USDM F22C Engine with 637 miles

[Jan Pedersen]

That is one sick conversion! I'm not sure it qualifies as a cheap mod though...

[Mux213]

Some people have way to much money and way to much time on their hands. I am so jalous!

[jamiemirror]

Jan Pedersen Wrote:Thanks for your comments, guys!

Mo do you have any ideas for cheap performence mods?

And I still woulf like to know if I can use the 280 deg cam without changing anything else...

Ported and milled head (10+ CR), 280 cam and sidedraught carburators will be greath !
If I remember correct - your dizzy is not ECU - dependent (on carburated Starlet)...so just add some advance to the ignition also.

[mo-racing]

hello!
i am not so confident that just a 280° cam without anything else will work right. at least you would need some bigger carburetors like jamie said. but its a sideflow engine ... 2 valve .... 1200ccm ... i would be lucky if it runns normal. 56hp, would have been happy this winter (i just had 47 ).
be carefull with the ignition timing. i destroid KP61 1.300ccm 65ps because of pinging some time ago. i wouldnt do that again on a stock engine
enjoy it like it is and save for another engine and other hardware (AE86 tech) if you really want to. at least thats what i am planing for the far far future

hey, at toymods.com.au there seem to be some blokes who really love these old engines. they may know some small tricks!?

[NoHachi]

Wow! nice starlet with the F20C/D. Must go like a rocket!

Of the oldscool engines, most people tinker with the 2TC and 3TC engines (1600 and 1800cc's). The older K series are difficult to get parts for.

Usually though, the T series crossmember of similar cars (corolla etc) bolt right in. Do that, bolt in a 3TGTEU and do the bhp dance. Much better blocks for boost then the 4A-GZE.

[The Doctor]

3T-GTEU, nice engine

Fits very nicely in a KE25/TE27

[Jan Pedersen]

Thanks for your advise guys! I really didn't know anything about the k-series engine and I just hoped to be able to get a cheap power increase... I'll leave it stock for now and focus on my AE86 project

Nice car, Doc!