4 pot rx7 calipers

[Jimmi The Kid]

Please note, that Civic discs are much lighter than Min Coopers.

My RX7 setup are only 1kg more than stock. I use Brembo Max disc.

[assassin10000]

What year/model/size civic discs did you use? What caliper brackets?

Got any pics?

Andrew

[PatrickAE86]

think that's from a civic EG model with vtec engine ?

they are 262mm if i'm right

[Eifelaner]

eg2, eg6, ek4, just to name a view

[Jimmi The Kid]

Well, I got a Brembo Max part number: 09.5509.75

Use this site to see whats match up, search for a 1994-2000 Honda Civic. http://www.rockauto.com/

[Jimmi The Kid]

I made my own brackets, it actually pretty simpel. Just bolt op the disc on the hub, cut the dustcover and the original screwholes off the original caliper bracket and install it all on the suspension. Then place your RX7 caliper with pads on the disc, and figure out to made an addon off the original bracket, so it will support the X7 caliper. And then go and weld it propperly!

Or you can buy some brackets :wink:

But I'm sorry, I told you a lie, I simplye forgot it The discs will NOT bolt up! You have to drill some new holes, but this is pretty easy, just bolt the original and the new discs together with 2 bolts and drill the holes trough the original ones.

[Jimmi The Kid]

I just uploaded some pics, sorry they are not the best :wink: http://photobucket.com/evolution20v