levin from Belgium - demee76

[Turner from Russia]

Val`deMaR
Конечно могу)) Я Светомузыка с ае86 клуба ) партнумбер сцепы таков TH01SD

[demee76]

Slowboy2:
Parts are :
12-229L and 12-229R (ref on the taillights), in the Toyota EPC, parts are 81550-1A302 and 81560-1A302 for the complete kit (with sockets).

License plate lamp assy is 81270-12330 (still aviable new )

The center panel is 75803-12050

Didier: thanks for the pic

[slowboy2]

thanks

[kennedy8383]

Look clean and good...

[demee76]

Hi, here are some news of my 86.
Only 500km in 2012. I've had some rust again. So, I've decided to restore the car "again" with a complete sandblasting and ZN-AL treatment.
Some parts will be reniewed and the kit will disappear. I've bought new JDM kouki bumpers with 2dhand levin jdm mudguards and skirts.
Here are some pics of the job:















Welding is planned for the end of X-mas hollidays and after sandblasting again and Zn-Al treatment

[Aram]

If you do it, do it properly.

[oldskull]

+1 what Aram said. its look like a great project

[Ivan141]

Shell looks clean enough.. should clean up beautifully.

[demee76]

Some news of the actual work:

[demee76]

Just see that I've forgot to update this topic.

So, the car is finished and on the road again. Here are some pics:





Epoxy and begin of the paint job:

---

And finished with new wheels, suspensions (BC racing), new brakes (dicxel disc + project Mu pads), martelius exhaust, GRP4 rear links, new JDM bumpers. Special thank to sc86 & Chris for some parts diffiult to find.







Exterior:



The interior:



Next step: rebuild T50, shaft and a good engine (busy with the prep of the engine).
Set up is:
20v crank, Crower rods, JE pistons (12.1), cometic gaskets, acl bearings, TTV flywheel + competition clutch, ross racing harmonic damper => all balanced. HKS oil press kit
Head: polished, HKS spring, aem pullies, Webcam camshafts (to begin because I already have them), ST ITB with T3 adapter plate, noby booth carbon airbox.
Injection: bigger injectors, programmable ECU, SARD fuel press regulator...
Electric fans...