Correct connection brake master cylinder?

[bozu]

Gents,

I'm currently rebuilding my car and recently installed a new brake master cyl. Just want to double check if it is connected properly now to the proportioning valve block.
See picture below, can someone confirm?

[bozu]

No one?

[Bean]

(07-23-2015 06:28 PM)bozu Wrote:  No one?

It's a bit hard to see to be honest

[bozu]

The side connection of the bmc goes to the left top of the proportioning valve and de back connection of the bmc goes to the left bottom of the proportioning valve

[Uzelac]

AFAIR there are letters casted on valve... look them up.

[bozu]

I'm only interested in the connection with the bmc. The other ones ive got.
On the left top of the valve there is a 'F' and left bottom an arrow pointing in to the valve.

I would assume F stands for feed but why is there also an arrow pointing in.

On the bmc there is a letter on one port which looks like an F or a P. Ive connected that port to the F on the valve.

Ive already tried to look it up in the manual but no luck. Hence why i'm asking here.

Just want to double check, don't want to have to change it after everything is bled.