1984 ae86 no oil cooler

[paul--86]

is it easy to fit oil cooler to 1984 ae86 that has none

[gon]

yup ... just get the parts

oil filter sandwich adapter , the oil cooler and some pipes (rubber would be enough)

[AEsuperG]

i have a sump pan with bung, hoses and sandwich...all needed is a cooler

pm me for details

[jondee86]

OEM oil cooler is a by-pass type, that operates at near atmospheric
pressure, and returns oil to the sump. Just about any type of oil-resistant
hose or pipework will be fine.

Aftermarket coolers take oil from the filter to the cooler and back to the
filter. They are part of the engine lubrication system, and operate at the
same pressure as you read on your gauge. Your hoses, fittings and
pipework should be rated to operate at 10 bar or more without leaking.

If it is a full flow oil cooler, consider one with a thermostatic valve to
prevent the oil temperature dropping below 80 deg C.

Cheers... jondee86