Injector Impedance Questions ATTN: Ivan/Peter(parrot)/Banpei

[gon]

shanemck Wrote:I was told if they are less than 8ohms they are low impedance, is this for the megasquirt? If so i'm havin the same prob.

you are right.
megasquirt does work with low imp injectors.
there are two options for this , either you use pulse width modulation



or you can use an adaptor board
http://www.aeu86.org/viewtopic/tutorial-...e29/t/7516

check the "final notes" on the first post.

I highly recommend the second option, several problems have been reported with using pulse width modulation.

I am using one of these adapter boards without a glich so far.