Injector Impedance Questions ATTN: Ivan/Peter(parrot)/Banpei
02-07-2009, 01:34 PM
Post: #6
 
Welcome back Jason! I feared for your sanity for a while there.......

As above, you should use the low impedence injectors you have with the correct ECU. Even if you had wrong impedence for the ECU it would run though pretty badly.

I'm with Ivan, check your circuit open relay wiring and also the EFI relay. If you haven't already, download the EFI diagnosis manual from the tech docs and follow the diagnosis flowcharts exactly! Problems in either area will not throw up a code.
Find all posts by this user


Messages In This Thread
[] - shanemck - 02-07-2009, 10:37 AM
[] - gon - 02-07-2009, 12:41 PM
[] - Ivan141 - 02-07-2009, 01:25 PM
[] - parrot - 02-07-2009 01:34 PM
[] - CHACAMAN - 04-28-2009, 03:20 PM
[] - Diskovod - 04-29-2009, 01:08 AM
[] - sergiocharged - 04-29-2009, 06:08 AM
[] - NoHachi - 04-29-2009, 07:25 AM
[] - banpei - 04-29-2009, 09:08 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  20v Silvertop - New Haltech ECU & Couple of questions 20valver 10 2,044 05-26-2024 07:40 PM
Last Post: totta Crolla
  Windscreen stoopid(?) questions.... Mylesmck 7 955 04-30-2024 09:46 PM
Last Post: Mylesmck
  Brake Bias Questions mad.matt 10 11,113 01-03-2019 04:54 AM
Last Post: mad.matt
  wider rear axle,track width,suspension questions ditn 6 8,607 10-18-2016 11:50 AM
Last Post: fantapants
  Suspension questions leon205gti 17 14,530 04-30-2016 09:26 PM
Last Post: krullibull

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication