Tuned 4AGE results
|
04-16-2009, 11:51 AM
Post: #20
|
|||
|
|||
thanks apardal, I set the cams to 110/110 because the datasheet for the cams tell me this.
Isn't 100/100 a bit too much overlap, don't you loose alot power at low rpms. I have a Walker muffler (It's should be similar to the original). I have no TVIS because I have the small port engine. And compression is on the small port 10,4:1 and a bit higher with the thinner MHG. Ignition timing is at 32° at high rpm and load. Between 12,5 and 13,5 AFR is nearly no power difference. Best regards |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Tuned 4AGE results - irishtwincam - 04-02-2009, 12:04 AM
[] - oldeskewltoy - 04-02-2009, 01:47 AM
[] - irishtwincam - 04-03-2009, 09:48 AM
[] - irishtwincam - 04-03-2009, 09:56 AM
[] - irishtwincam - 04-03-2009, 09:57 AM
[] - irishtwincam - 04-03-2009, 03:21 PM
[] - totta Crolla - 04-04-2009, 07:37 PM
[] - irishtwincam - 04-05-2009, 10:39 PM
[] - max78 - 04-16-2009 11:51 AM
[] - oldeskewltoy - 09-02-2009, 12:54 AM
[] - oldeskewltoy - 09-02-2009, 05:39 PM
[] - irishtwincam - 05-19-2013, 07:16 PM
[] - oldeskewltoy - 07-10-2013, 03:07 AM
[] - totta Crolla - 07-12-2013, 08:40 PM
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Max a 16v 4AGE can be tuned to? | heshan | 20 | 54,478 |
04-21-2009 08:31 PM Last Post: banpei |
|
Silvertop burning oil - compression results | Jezza_hr | 3 | 4,635 |
10-18-2008 02:51 AM Last Post: jondee86 |
|
AE86 Dyno Results! | Wraith | 9 | 14,023 |
10-16-2006 09:13 AM Last Post: Mux213 |
User(s) browsing this thread: 2 Guest(s)