mild cams... is it worth it?
|
01-26-2010, 04:18 PM
Post: #2
|
|||
|
|||
that realy depends how you drive it and what other mods you have (exhaust in particular) - the oem cams run out of breath a bit below 7k rpm if you want more cams are sure worth it... I'd have a look at the first two catcams.com they have a bit higher lift along with more duration and work quite good on the stock ECU as long as you modify the exhaust a little (if you still have the OEM unit, changing the bit going over the axle helps alot - as it's the most restrictive part)
AE86 ex-daily |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
mild cams... is it worth it? - megabob - 01-26-2010, 02:17 PM
[] - Bean - 01-26-2010 04:18 PM
[] - PatrickAE86 - 01-26-2010, 07:49 PM
[] - PatrickAE86 - 01-26-2010, 09:58 PM
[] - NonStopTuning - 02-27-2010, 08:12 PM
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Shim size for AM cams | kazi | 4 | 5,132 |
12-18-2017 05:34 PM Last Post: oldeskewltoy |
|
Toda Cams | Alex170984 | 7 | 8,471 |
02-11-2017 05:50 PM Last Post: Alex170984 |
|
20V cams - CATCAMS vs KELFORD? | Grant | 19 | 38,457 |
11-19-2015 07:45 AM Last Post: hachirokkos |
|
Effects of valve lift - worth it going higher? | harkes | 18 | 16,612 |
03-17-2014 09:21 PM Last Post: oldeskewltoy |
|
cams cams cams | megabob | 60 | 55,889 |
12-31-2013 01:19 AM Last Post: gze spec |
User(s) browsing this thread: 6 Guest(s)