Adjustable Panhard Rod Bar

[eight-six]

Its easy to do – Drive the car between 2 gate posts.

Standing behind the car.

If the car is lowered you will probably need to move the car body over to left and the axle over to the right.

Attach a ratchet strap around the left rear towing and then around 1 of the gate posts.

Attach another ratchet strap around the right rear wheel and around the other gate post.

Disconnect the panhard bar.

Then ratchet each of the straps to pull the body and axle inline. Measure off the arch initially and then when you close find 2 fixed points between the axle and the chassis to get it bang on.

Once done, adjust the Panhard to the correct length and bolt back into place.