|
4age to 7age Questions
|
|
09-10-2010, 12:54 PM
Post: #2
|
|||
|
|||
|
Standard 100kw (smallport AE92 engine?!) has a CR of 10.3 to 1. If you now put these pistons in the 7AFE block you will get ~11.0 to 1 with the 4AGE head.
4AGE pistons are circlip 20mm, but a good engine builder will be able to hone the 7AFE conrods to match the circlip pins from the 4AGE pistons. Standars ECU might be possible to run that setup, but you'll have to use the smallport injectors and raise your fuel pressure until you get good AFR readings. http://monkeymagic86.wordpress.com |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
4age to 7age Questions - Libbor - 09-10-2010, 12:39 PM
[] - Nomuken - 09-10-2010 12:54 PM
[] - corolla4agze - 10-08-2010, 05:37 PM
[] - oldeskewltoy - 10-09-2010, 08:16 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 7AGE Build | apardal | 5 | 702 |
08-02-2024 12:11 PM Last Post: apardal |
|
| 20v Silvertop - New Haltech ECU & Couple of questions | 20valver | 10 | 1,952 |
05-26-2024 07:40 PM Last Post: totta Crolla |
|
| Windscreen stoopid(?) questions.... | Mylesmck | 7 | 892 |
04-30-2024 09:46 PM Last Post: Mylesmck |
|
| Brake Bias Questions | mad.matt | 10 | 11,001 |
01-03-2019 04:54 AM Last Post: mad.matt |
|
| wider rear axle,track width,suspension questions | ditn | 6 | 8,522 |
10-18-2016 11:50 AM Last Post: fantapants |
|
User(s) browsing this thread: 2 Guest(s)