Idle problems

Threaded Mode | Linear Mode

Idle problems

12-26-2010, 11:11 PM

Post: #44

max_ae86 Offline

Member

Posts: 244
Joined: Dec 2004
Reputation: 0

jondee86 Wrote:Now that you have the AAV working correctly, you can make small
adjustments to the warm idle with the Idle Air Adjustment Screw that
is located down the tube at the side of the throttle body. Sometimes
there is a black rubber cap on top of the tube. Turn the screw clockwise
to lower the idle speed.

Cheers... jondee86

Unfortunately, it's already in lowest position. As I said, there is an adjustable plate inside AAV but you need the special key to adjust it. So it can be adjusted from the inside as well. :wink:

Fun is not the straight line!

« Next Oldest | Next Newest »

Messages In This Thread

Idle problems - filh - 02-21-2009, 10:57 PM

[] - tolisspi - 02-21-2009, 11:44 PM

[] - filh - 02-22-2009, 01:00 AM

[] - gtsr54321 - 02-22-2009, 06:44 AM

[] - jondee86 - 02-22-2009, 10:30 AM

[] - Ivan141 - 02-22-2009, 11:53 AM

[] - filh - 02-22-2009, 03:38 PM

[] - The Doctor - 02-22-2009, 04:01 PM

[] - Sanity Clause - 02-22-2009, 07:55 PM

[] - filh - 02-23-2009, 01:00 AM

[] - filh - 02-25-2009, 12:36 AM

[] - Sanity Clause - 02-26-2009, 06:41 PM

[] - filh - 02-28-2009, 01:01 AM

[] - jondee86 - 02-28-2009, 10:14 AM

[] - parrot - 02-28-2009, 01:10 PM

[] - Sanity Clause - 02-28-2009, 02:26 PM

[] - filh - 03-01-2009, 02:24 AM

[] - parrot - 03-01-2009, 03:21 AM

[] - jondee86 - 03-01-2009, 04:16 AM

[] - JonnyAE86 - 03-01-2009, 05:21 AM

[] - filh - 03-01-2009, 07:57 PM

[] - jondee86 - 03-02-2009, 01:39 AM

[] - filh - 03-05-2009, 01:26 AM

Suddenly, it all makes sense :) - jondee86 - 03-05-2009, 10:02 AM

[] - Snejk - 03-06-2009, 06:34 PM

[] - filh - 03-11-2009, 01:54 AM

[] - alimonos - 03-11-2009, 10:20 AM

[] - filh - 03-12-2009, 01:14 AM

Bouncing Idle - shawnho - 03-30-2009, 07:45 AM

Re: Bouncing Idle - jondee86 - 03-30-2009, 08:43 AM

[] - filh - 03-30-2009, 01:43 PM

Bouncing Idle Fixed - shawnho - 04-01-2009, 04:03 AM

[] - filh - 09-16-2010, 10:44 PM

Ghost in the machine :) - jondee86 - 09-17-2010, 12:03 AM

[] - filh - 09-21-2010, 10:57 PM

[] - max_ae86 - 12-23-2010, 10:18 AM

[] - max_ae86 - 12-24-2010, 09:33 AM

[] - max_ae86 - 12-25-2010, 08:05 PM

[] - max_ae86 - 12-26-2010, 05:16 PM

[] - Hachi - 12-26-2010, 05:27 PM

[] - Ivan141 - 12-26-2010, 06:15 PM

[] - Hachi - 12-26-2010, 07:59 PM

[] - jondee86 - 12-26-2010, 10:16 PM

[] - max_ae86 - 12-26-2010 11:11 PM

[] - max_ae86 - 12-26-2010, 11:34 PM

[] - Hachi - 12-27-2010, 02:34 AM

[] - max_ae86 - 12-27-2010, 10:03 AM

[] - max_ae86 - 12-27-2010, 10:58 AM

[] - irishtwincam - 01-13-2011, 12:49 PM

[] - max_ae86 - 01-13-2011, 01:23 PM

[] - max_ae86 - 01-13-2011, 01:34 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	No idle below 2000 rpm rich running	Steller Engineering	3	1,411	11-30-2022 02:45 PM Last Post: RolanTHUNDER
	Engine starts/revs but no idle	GenkiMotors	17	7,123	11-20-2021 04:12 AM Last Post: GenkiMotors
	Big wheel problems	gh0st	16	8,007	11-15-2021 10:51 PM Last Post: gh0st
	Starting problems 4-AGE kouki	Hanzo	3	2,597	08-31-2021 06:20 PM Last Post: totta Crolla
	exhaust odor/idle MOT issue	Ryo	7	7,226	07-15-2019 09:17 AM Last Post: jondee86

User(s) browsing this thread: 2 Guest(s)