Idle problems

Threaded Mode | Linear Mode

Idle problems

12-27-2010, 10:58 AM

Post: #48

max_ae86 Offline

Member

Posts: 244
Joined: Dec 2004
Reputation: 0

... and few more things. When you remove throttle it's good to:

1) Replace 2 seals on the butterfly shaft to prevent false air coming in and reduce shaft vibrations. I think I manage to find 15/8 seals, the original is 15/9 (as far as I remember, better mesure it first) and it’s very hard to find. Put some grease during replacement.
2) Inspect throttle plate and shaft from wear and sharp edges (usually occurs on plate sides and cause "sticky" throttle feel). Carefully remove sharp edges (if there is any).

Fun is not the straight line!

« Next Oldest | Next Newest »

Messages In This Thread

Idle problems - filh - 02-21-2009, 10:57 PM

[] - tolisspi - 02-21-2009, 11:44 PM

[] - filh - 02-22-2009, 01:00 AM

[] - gtsr54321 - 02-22-2009, 06:44 AM

[] - jondee86 - 02-22-2009, 10:30 AM

[] - Ivan141 - 02-22-2009, 11:53 AM

[] - filh - 02-22-2009, 03:38 PM

[] - The Doctor - 02-22-2009, 04:01 PM

[] - Sanity Clause - 02-22-2009, 07:55 PM

[] - filh - 02-23-2009, 01:00 AM

[] - filh - 02-25-2009, 12:36 AM

[] - Sanity Clause - 02-26-2009, 06:41 PM

[] - filh - 02-28-2009, 01:01 AM

[] - jondee86 - 02-28-2009, 10:14 AM

[] - parrot - 02-28-2009, 01:10 PM

[] - Sanity Clause - 02-28-2009, 02:26 PM

[] - filh - 03-01-2009, 02:24 AM

[] - parrot - 03-01-2009, 03:21 AM

[] - jondee86 - 03-01-2009, 04:16 AM

[] - JonnyAE86 - 03-01-2009, 05:21 AM

[] - filh - 03-01-2009, 07:57 PM

[] - jondee86 - 03-02-2009, 01:39 AM

[] - filh - 03-05-2009, 01:26 AM

Suddenly, it all makes sense :) - jondee86 - 03-05-2009, 10:02 AM

[] - Snejk - 03-06-2009, 06:34 PM

[] - filh - 03-11-2009, 01:54 AM

[] - alimonos - 03-11-2009, 10:20 AM

[] - filh - 03-12-2009, 01:14 AM

Bouncing Idle - shawnho - 03-30-2009, 07:45 AM

Re: Bouncing Idle - jondee86 - 03-30-2009, 08:43 AM

[] - filh - 03-30-2009, 01:43 PM

Bouncing Idle Fixed - shawnho - 04-01-2009, 04:03 AM

[] - filh - 09-16-2010, 10:44 PM

Ghost in the machine :) - jondee86 - 09-17-2010, 12:03 AM

[] - filh - 09-21-2010, 10:57 PM

[] - max_ae86 - 12-23-2010, 10:18 AM

[] - max_ae86 - 12-24-2010, 09:33 AM

[] - max_ae86 - 12-25-2010, 08:05 PM

[] - max_ae86 - 12-26-2010, 05:16 PM

[] - Hachi - 12-26-2010, 05:27 PM

[] - Ivan141 - 12-26-2010, 06:15 PM

[] - Hachi - 12-26-2010, 07:59 PM

[] - jondee86 - 12-26-2010, 10:16 PM

[] - max_ae86 - 12-26-2010, 11:11 PM

[] - max_ae86 - 12-26-2010, 11:34 PM

[] - Hachi - 12-27-2010, 02:34 AM

[] - max_ae86 - 12-27-2010, 10:03 AM

[] - max_ae86 - 12-27-2010 10:58 AM

[] - irishtwincam - 01-13-2011, 12:49 PM

[] - max_ae86 - 01-13-2011, 01:23 PM

[] - max_ae86 - 01-13-2011, 01:34 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	No idle below 2000 rpm rich running	Steller Engineering	3	1,411	11-30-2022 02:45 PM Last Post: RolanTHUNDER
	Engine starts/revs but no idle	GenkiMotors	17	7,123	11-20-2021 04:12 AM Last Post: GenkiMotors
	Big wheel problems	gh0st	16	8,007	11-15-2021 10:51 PM Last Post: gh0st
	Starting problems 4-AGE kouki	Hanzo	3	2,597	08-31-2021 06:20 PM Last Post: totta Crolla
	exhaust odor/idle MOT issue	Ryo	7	7,226	07-15-2019 09:17 AM Last Post: jondee86

User(s) browsing this thread: 11 Guest(s)