The old Crown Wheel and Pinion whining questions...

Threaded Mode | Linear Mode

The old Crown Wheel and Pinion whining questions...

01-10-2011, 03:38 AM

Post: #5

allencr Offline

Member

Posts: 128
Joined: Aug 2010
Reputation: 1

Jezza_hr Wrote:I just wanted to be sure that what I'm hearing/feeling is normal after installing a new CW&P set.

NO, it is not normal and does not need any specific running/bedding in and it will not get better, only worse or it will just stay almost the same for a looong time if its bad setup isn't too far off.
The new bearing's pre-load may have been setup on the high side so it will have some resistance for the first few hours or so. It will be generating some extra heat. Don't plan on climbing Pikes Peak or pulling a trailer for 1000km/600mi.

« Next Oldest | Next Newest »

Messages In This Thread

The old Crown Wheel and Pinion whining questions... - Jezza_hr - 01-10-2011, 01:42 AM

[] - jondee86 - 01-10-2011, 02:02 AM

[] - Jezza_hr - 01-10-2011, 02:13 AM

[] - jondee86 - 01-10-2011, 02:27 AM

[] - allencr - 01-10-2011 03:38 AM

[] - Jezza_hr - 01-10-2011, 09:29 AM

[] - allencr - 01-11-2011, 12:55 AM

[] - fax0815 - 01-11-2011, 02:33 AM

[] - Jezza_hr - 01-11-2011, 09:41 AM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	20v Silvertop - New Haltech ECU & Couple of questions	20valver	10	2,744	05-26-2024 07:40 PM Last Post: totta Crolla
	Windscreen stoopid(?) questions....	Mylesmck	7	1,357	04-30-2024 09:46 PM Last Post: Mylesmck
	Brake Bias Questions	mad.matt	10	11,679	01-03-2019 04:54 AM Last Post: mad.matt
	DIY: a quick outline on why & how to set pinion angle.	assassin10000	9	18,726	12-21-2016 10:28 PM Last Post: ditn
	Rebuild rear disc brakes toyota crown ms112 axle	bozu	0	3,861	12-21-2016 09:37 PM Last Post: bozu

User(s) browsing this thread: 4 Guest(s)