Forged rods for 4AGE 20v options

[Bean]

fkn16v Wrote:yes any combination works i believe, its only the supercharged version 4agze that doesn't work, its alot bigger then the other 2, about 243mm or something around that mark.

The 200mm (bigport) and 212mm (small port and 20v's) are the same outside dimension flywheels its only the clutch cover and plate that differs, many go for the 212mm simply for the extra clutch surface area and potential extra clamping force.

Just make sure you order a clutch to suit the right size flywheel, not 100% sure if its possible to mix and match between the 200mm and 212mm.

mix matching the two sizes doesn't work but can use both of the smaller ones on small, big, silver and blacktop. If you go for a uprated clutch flywheel combo you don't have to worry about clamping force etc as to be honest our little engines don't produce much torque in an NA setup i.e. Exedy Super Single will hold in excess of 200 Nm (twice then most tunes) of heavy abuse