the search for the truth about our injectors

[jondee86]

Yes... I've seen where the USDM AE86 uses low Ohm injectors, whereas
my (Euro spec I believe) AE86 runs high Ohm injectors*. Kind of like the US
got AFM and the Euro spec got MAP sensored engines.

Now that I have a smallport installed with cams, ITB's and aftermarket
ECU, I thought I would check the duty cycle. It's hitting around 80% at
8000 rpm with WOT, so it seems the stock injectors (235cc high Ohm) are
are doing the job.

Cheers... jondee86

* Assumed to be high Ohm as there is no resistor pack. However, apparently
there were some factory ECU's that could run low Ohm without needing
the resistor pack. Perhaps I better check that out...