bluetop 4age cams into 4agze ?

[oldeskewltoy]

Okami Wrote:I have the first gen 4agze with 145bhp in my AE86.
I have put a HKS spec (endevour engineering) crankpulley on my engine
installed a Janspeed 2 inch exhaust (complete) also with a 4 - 1 mani.

Everything has been working super but I am still missing a little bit of OOMPH!

I would like to go 200bhp'ish.



So I was thinking maybe to drop those 4age bluetop cams into the 4agze I have.

Good idea or not?
And what else can I do without modifying too much stuff and also save some money but get a little bit more bhp.

Thanks in advance guys.

Running TVIS cams offers you a bit more lift, and a bit more duration. The lift is likely useful, the duration is not likely to "hurt" anything.


What you might look into if you really want to get to 200bhp... 1) ported head, 2) custom cams 248 duration w/8.50mm lift, shimless buckets, valve springs capable of 9mm lift, aftermarket management