4AGE camshafts (again)

[Alex170984]

Hello,

Firstly, thank you so much for all this help so early on! Incredibly helpful and you guys are not losing me with technical talk LOL

As for the FPR I was looking at getting an Apexi SAFC to help me out with the fuel and air. I would get a Greddy Emanage but its pricey and the SAFC can be mounted in the cabin, doesn’t plug into a laptop but does the same job anyway.

I’ll try and work out what my compression will be to determine head gasket thickness, but you have given me a good idea, so hopefully the calcs will work out near your idea

I was considering dremelling out the casting marks on the head. I did have a quote done for engine work but the head price was starting at £75 and if I can de burr it myself I won’t do the hotspots.

I got a price from a company called Gosnays near Romford for £228 which included, head skim, block deck, head and block degrease, boring to 81.5mm and honing.

Got the same price from a company in Suffolk but Romford is only 10miles from where I work so it makes sense, unless anyone else can recommend a good machinists in the Essex, Herts, London Boroughs or Suffolk area?

Regards,

Alex