Whats the biggest cams for the 4AG?
04-02-2005, 12:34 PM
Post: #5
 
I read somewhere that 260 is the max for the stock ecu. Wilder cams seem to work also, but their vacuum around idle is very low. This could sometimes cause idleproblems (who cares, just blip that throttle at stoplights) and, more seriously, lean conditions in the first moments of off idle acceleration. This could cause short bursts of detonation.

Also remember that camflow is not only determined by duration and lift. The lobeprofile is what's really important aka the area under the duration vs lift curve. This differs significantly between brands and is the reason why on cam can work better then another even though they seem to have exactly the same specs.

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user


Messages In This Thread
[] - Knudsen - 04-02-2005, 12:14 AM
CAMS - auxoura - 04-02-2005, 06:30 AM
[] - Mulisha - 04-02-2005, 08:37 AM
[] - Ivan141 - 04-02-2005 12:34 PM
[] - robokill - 04-02-2005, 03:07 PM
[] - NoHachi - 04-02-2005, 03:35 PM
[] - Mulisha - 04-02-2005, 07:40 PM
[] - NoHachi - 04-02-2005, 08:38 PM
[] - JonT - 04-02-2005, 09:55 PM
[] - robokill - 04-02-2005, 11:00 PM
[] - filh - 04-13-2005, 08:13 PM
[] - JonT - 04-14-2005, 07:50 AM
[] - jamiemirror - 04-14-2005, 01:07 PM
[] - alimonos - 04-14-2005, 01:12 PM
[] - jamiemirror - 04-14-2005, 01:17 PM
[] - alimonos - 04-14-2005, 01:22 PM
[] - Dorito86 - 04-14-2005, 01:50 PM
[] - jamiemirror - 04-14-2005, 01:56 PM
[] - Dorito86 - 04-14-2005, 01:58 PM
[] - alimonos - 04-14-2005, 01:59 PM
[] - jamiemirror - 04-14-2005, 02:03 PM
[] - Mulisha - 04-17-2005, 02:49 PM
[] - jamiemirror - 04-18-2005, 02:09 PM
[] - Mulisha - 04-18-2005, 02:41 PM
[] - Eircamae86 - 04-20-2005, 12:42 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Question about 4AG 20v Engine Block CHACAMAN 1 1,589 06-10-2022 05:17 PM
Last Post: oldeskewltoy
  Newb question on "how-to" guide for ITBs on JDM 4AG Bluetop w/ MAP mister86 12 10,880 02-10-2020 06:39 PM
Last Post: Power_uP
  Shim size for AM cams kazi 4 5,114 12-18-2017 05:34 PM
Last Post: oldeskewltoy
  whats the crack with 16v turbo? kazi 5 6,126 08-02-2017 12:15 AM
Last Post: kazi
  Toda Cams Alex170984 7 8,461 02-11-2017 05:50 PM
Last Post: Alex170984

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication