Cams doubt

Threaded Mode | Linear Mode

Cams doubt

01-31-2013, 05:51 AM

Post: #6

oldeskewltoy Offline

4AG Super Genius ;)

Posts: 1,825
Joined: Jan 2007
Reputation: 1

T_AE86 Wrote:Thanks!! That's a lot of information (i'm ignorant on this topic)

I was thinking to shave the head and take a "good" size of gasket, but i had no idea about how much (i was thinking polish it and remove t-vis too)

Those 256 type cams need to work the head?? or are "plug and play" in the stock head?

don't remove TVIS... it helps for street driving, and as long as you are using the stock ECU, the butterflies cause fewer problems in... then removed.

The Web 294 cam I recommended will work as a plug and play....

Speaking about "plug and play", camshaft makers will tell you their camshaft is "plug and play", but in reality no camshaft should be installed that way. Every camshaft should be installed and timed CAREFULLY to TRUE TOP DEAD CENTER... this is the only way to get peak performance.

Dan -

You can | Sad

.... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991

« Next Oldest | Next Newest »

Messages In This Thread

Cams doubt.......(and blocks....and BT doubts...) - T_AE86 - 07-09-2011, 04:59 PM

[] - Project D - 07-09-2011, 08:16 PM

[] - T_AE86 - 01-30-2013, 06:31 PM

[] - oldeskewltoy - 01-30-2013, 07:59 PM

[] - T_AE86 - 01-30-2013, 09:20 PM

[] - oldeskewltoy - 01-31-2013 05:51 AM

[] - Project D - 01-31-2013, 01:14 PM

[] - Alex170984 - 01-31-2013, 03:23 PM

[] - oldeskewltoy - 01-31-2013, 08:57 PM

[] - T_AE86 - 02-01-2013, 12:06 AM

[] - oldeskewltoy - 02-01-2013, 12:33 AM

[] - Alex170984 - 02-01-2013, 03:53 PM

[] - NoHachi - 02-01-2013, 04:54 PM

[] - Bean - 02-02-2013, 04:03 PM

[] - T_AE86 - 02-05-2013, 12:50 AM

[] - Uzelac - 02-05-2013, 01:09 AM

[] - Bean - 02-05-2013, 08:56 AM

[] - Vaptor - 02-05-2013, 09:32 AM

[] - Bean - 02-05-2013, 11:38 AM

[] - Vaptor - 02-05-2013, 12:06 PM

[] - oldeskewltoy - 02-05-2013, 08:36 PM

[] - oldeskewltoy - 02-05-2013, 08:50 PM

[] - Uzelac - 02-05-2013, 11:08 PM

[] - ditn - 02-05-2013, 11:13 PM

[] - Uzelac - 02-06-2013, 02:50 AM

[] - T_AE86 - 02-07-2013, 12:34 AM

[] - Bean - 02-07-2013, 01:04 AM

[] - fax0815 - 02-07-2013, 01:18 AM

[] - Jan Pedersen - 02-07-2013, 08:17 AM

[] - Jan Pedersen - 02-07-2013, 08:19 AM

[] - T_AE86 - 02-07-2013, 10:09 AM

[] - 4000GT - 02-07-2013, 10:20 AM

[] - T_AE86 - 02-07-2013, 10:35 AM

[] - NoHachi - 02-07-2013, 11:18 AM

[] - Uzelac - 02-07-2013, 12:44 PM

[] - oldeskewltoy - 02-07-2013, 07:34 PM

[] - Bean - 02-07-2013, 07:36 PM

[] - Jan Pedersen - 02-07-2013, 10:32 PM

[] - T_AE86 - 02-08-2013, 05:42 PM

[] - Bean - 02-08-2013, 06:30 PM

[] - Jan Pedersen - 02-08-2013, 09:57 PM

[] - T_AE86 - 02-09-2013, 12:26 AM

[] - Bean - 02-09-2013, 11:55 AM

[] - T_AE86 - 02-09-2013, 02:21 PM

[] - Bean - 02-09-2013, 04:06 PM

[] - T_AE86 - 02-12-2013, 12:24 PM

[] - Bean - 02-12-2013, 01:45 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Shim size for AM cams	kazi	4	5,186	12-18-2017 05:34 PM Last Post: oldeskewltoy
	Toda Cams	Alex170984	7	8,617	02-11-2017 05:50 PM Last Post: Alex170984
	20V cams - CATCAMS vs KELFORD?	Grant	19	38,807	11-19-2015 07:45 AM Last Post: hachirokkos
	cams cams cams	megabob	60	56,657	12-31-2013 01:19 AM Last Post: gze spec
	part numbers on standard cams	Alex170984	10	10,775	09-19-2013 02:53 PM Last Post: pack

User(s) browsing this thread: 10 Guest(s)