Cams doubt

Threaded Mode | Linear Mode

Cams doubt

02-05-2013, 08:36 PM

Post: #21

oldeskewltoy Offline

4AG Super Genius ;)

Posts: 1,825
Joined: Jan 2007
Reputation: 1

Bean Bandit Wrote:
Vaptor Wrote:Got to ask, are there any diffrence on a Head from a 3 Rip and a 7 Rip, besides one is Bigported and the other is smallported?

My plan was to use a Bigported Head from a 3 Rip Block, and a 7 Rip Block with oilsquirters.

sheesh nobody reads anymore... as Uzelac said any 4a/7a head will fit any 4a/7a block ... so no there are no differences fitting wise...

smallport head has a drain fitting... smallport 7 rib block also has drain fitting to match... largeport heads, 3 rib blocks, and many 7 rib blocks don't have drain fittings, 20V blocks have completely different oil pans.....

so although all heads will bolt to all blocks, care must be taken when mixing and matching

Dan -

You can | Sad

.... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991

« Next Oldest | Next Newest »

Messages In This Thread

Cams doubt.......(and blocks....and BT doubts...) - T_AE86 - 07-09-2011, 04:59 PM

[] - Project D - 07-09-2011, 08:16 PM

[] - T_AE86 - 01-30-2013, 06:31 PM

[] - oldeskewltoy - 01-30-2013, 07:59 PM

[] - T_AE86 - 01-30-2013, 09:20 PM

[] - oldeskewltoy - 01-31-2013, 05:51 AM

[] - Project D - 01-31-2013, 01:14 PM

[] - Alex170984 - 01-31-2013, 03:23 PM

[] - oldeskewltoy - 01-31-2013, 08:57 PM

[] - T_AE86 - 02-01-2013, 12:06 AM

[] - oldeskewltoy - 02-01-2013, 12:33 AM

[] - Alex170984 - 02-01-2013, 03:53 PM

[] - NoHachi - 02-01-2013, 04:54 PM

[] - Bean - 02-02-2013, 04:03 PM

[] - T_AE86 - 02-05-2013, 12:50 AM

[] - Uzelac - 02-05-2013, 01:09 AM

[] - Bean - 02-05-2013, 08:56 AM

[] - Vaptor - 02-05-2013, 09:32 AM

[] - Bean - 02-05-2013, 11:38 AM

[] - Vaptor - 02-05-2013, 12:06 PM

[] - oldeskewltoy - 02-05-2013 08:36 PM

[] - oldeskewltoy - 02-05-2013, 08:50 PM

[] - Uzelac - 02-05-2013, 11:08 PM

[] - ditn - 02-05-2013, 11:13 PM

[] - Uzelac - 02-06-2013, 02:50 AM

[] - T_AE86 - 02-07-2013, 12:34 AM

[] - Bean - 02-07-2013, 01:04 AM

[] - fax0815 - 02-07-2013, 01:18 AM

[] - Jan Pedersen - 02-07-2013, 08:17 AM

[] - Jan Pedersen - 02-07-2013, 08:19 AM

[] - T_AE86 - 02-07-2013, 10:09 AM

[] - 4000GT - 02-07-2013, 10:20 AM

[] - T_AE86 - 02-07-2013, 10:35 AM

[] - NoHachi - 02-07-2013, 11:18 AM

[] - Uzelac - 02-07-2013, 12:44 PM

[] - oldeskewltoy - 02-07-2013, 07:34 PM

[] - Bean - 02-07-2013, 07:36 PM

[] - Jan Pedersen - 02-07-2013, 10:32 PM

[] - T_AE86 - 02-08-2013, 05:42 PM

[] - Bean - 02-08-2013, 06:30 PM

[] - Jan Pedersen - 02-08-2013, 09:57 PM

[] - T_AE86 - 02-09-2013, 12:26 AM

[] - Bean - 02-09-2013, 11:55 AM

[] - T_AE86 - 02-09-2013, 02:21 PM

[] - Bean - 02-09-2013, 04:06 PM

[] - T_AE86 - 02-12-2013, 12:24 PM

[] - Bean - 02-12-2013, 01:45 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Shim size for AM cams	kazi	4	5,186	12-18-2017 05:34 PM Last Post: oldeskewltoy
	Toda Cams	Alex170984	7	8,617	02-11-2017 05:50 PM Last Post: Alex170984
	20V cams - CATCAMS vs KELFORD?	Grant	19	38,807	11-19-2015 07:45 AM Last Post: hachirokkos
	cams cams cams	megabob	60	56,657	12-31-2013 01:19 AM Last Post: gze spec
	part numbers on standard cams	Alex170984	10	10,775	09-19-2013 02:53 PM Last Post: pack

User(s) browsing this thread: 15 Guest(s)