Clutch problem
|
05-31-2013, 12:37 PM
Post: #3
|
|||
|
|||
Clutch problem
I would check the push rod in the slave cylinder. They typically have an adjust screw that will allow you to remove excessive clearance between the rod and the fork. Dave W
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Clutch problem - Rascal21 - 05-30-2013, 12:04 PM
Clutch problem - Dave W - 05-31-2013 12:37 PM
[] - Alex170984 - 05-31-2013, 06:00 PM
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Clutch pedal problem | andee17 | 3 | 4,503 |
07-25-2013 11:57 AM Last Post: jondee86 |
|
4agZe problem solved - 99% IC problem | Okami | 41 | 35,093 |
07-12-2012 04:49 PM Last Post: Okami |
|
AC problem? Idle problem? | KD2229 | 3 | 4,665 |
08-19-2009 02:08 AM Last Post: KD2229 |
|
Clutch Master Cylinder and Clutch Slave Cylinder fitment? | christsang7 | 2 | 5,020 |
07-01-2009 07:48 AM Last Post: jondee86 |
|
clutch problem | peter | 18 | 13,416 |
09-28-2008 10:10 PM Last Post: Jezza_hr |
User(s) browsing this thread: 2 Guest(s)